Operating Manual Vol 1 - ES Documentation

SMIQUtilities2.29.9 Calibration (CALIB)For servicing, the following menus offer access to calibrating routines and correction values:UTILITIES - CALIB - ALLVCO SUMVECTOR MODLEV PRESETREF OSC (cf. service manual)LEVEL (cf. service manual)ALC TABLELEV ATTLFGENInternal calibration routines LEV PRESET and VCO SUM are protected by a password. They can onlybe executed if the lock-out in the UTILITIES - PROTECT menu has been unlocked. The password isPASSWORD LEVEL 1 = "123456".Caution:Execute calibration routines only when the instrument has warmed upCalibration routines LEVEL and REF OSC are described in the service manual.Calibration ALLCALIB ALL triggers all internal calibrations which do not require any external measuring equipment. Thecalibrations with external measurements are described in the service manual.Menu selection:UTILITIES - CALIB - ALLFREQ 100. 000 000 0 MHz LEVEL - 30.0 dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDLF OUTPUTSWEEPLISTMEM SEQUTILITIESSYSTEMREF OSCPHASEPROTECTCALIBDIAGTESTMOD KEYAUX I/OBEEPERINSTALLALLVCO SUMVECTOR MODLEV PRESETOSC REFLEVELALC TABLELEV ATTLFGENCALIBRATE ALLFig. 2-261Menu UTILITIES - CALIB - ALLCALIBRATE ALLTriggers all internal calibrations.IEC\IEEE-bus command :CAL:ALL?1125.5555.03 2.417 E-9