Operating Manual Vol 1 - ES Documentation

Digital Standard 3GPP W-CDMA (FDD)SMIQFig. 2-105DIGITAL STD - WCDMA/3GPP menu – progress barSET DEFAULTSAVE/RECALL...TEST MODELSSets the default setup for 3GPP W-CDMA.For further information about the default setting see section 2.14.2.12.IEC/IEEE-bus command :SOUR:W3GP:PRESThe SMIQ supports two parallel SAVE/RECALL memory systems: The SAVEand RCL hardkeys are used to handle the frequency, level and state in the3GPP W-CDMA menu. Menu selection SAVE/REALL, however, manages allthe other parameters in the 3GPP W-CDMA menu. This also includes stationspecificparameters such as the channel table.RECALL SETTING Recalling a saved configuration.IEC/IEEE bus :SOUR:W3GP:SETT:LOAD "MYSETUP"SAVE SETTINGDELETE SETTINGSaving the current configuration.An existing setting can be overwritten or a new settingcan be created. The name of the new setting is assignedautomatically, e.g. WCDMASEQ1.If the setting is created via the IEC/IEEE bus, the nameis user-selectable and the usual restrictions apply.IEC/IEEE bus :SOUR:W3GP:SETT:STOR "MYSETUP"Deleting a configuration.IEC/IEEE bus :SOUR:W3GP:SETT:DEL "MYSETUP"Selection of one of the test models defined in the 3GPP standard [3]. This menuitem is available only in the downlink. The following test scenarios are available:Test ModelTest1_16TEST MODEL 1 (16 channels)Test1_32TEST MODEL 1 (32 channels)Application/measurementSpectrum emission maskACLRSpurious emissionsTransmit intermodulationModulation accuracyPeak code domain errorSpectrum emission maskACLRSpurious emissionsTransmit intermodulationModulation accuracy1125.5555.03 2.180E-9