11.07.2015 Views

Operating Manual Vol 1 - ES Documentation

Operating Manual Vol 1 - ES Documentation

Operating Manual Vol 1 - ES Documentation

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Enhanced Functions For Digital Standard 3GPP W-CDMA (FDD)SMIQGeneration principle of channel-coded P-CCPCH with system frame numberWith Enhanced P-CCHCP/BCH State On, channel coding activated (Channel Coding State On) and withP-CCPCH State under Specific Enhanced Channel Settings On, the SMIQ generates a channel-codedP-CCPCH (i.e. a broadcast channel BCH) according to the following principle:Counting SFNUser selectable data (e.g. data list)SFN(11 bit)Sys Info(235 bit)BCH Transport Block 0 (20 ms). . .SFN(11 bit)Sys Info(235 bit)BCH Transport Block 2047 (20 ms)BCH Channel Coding. . .Coded BCH Transport Block 0 Coded BCH Transport Block 2047. . .P-CCPCH Frame 0 P-CCPCH Frame 1 P-CCPCH Frame 4094 P-CCPCH Frame 4095P-CCPCH Slot 0 P-CCPCH Slot 1 P-CCPCH Slot 14. . .Fig. 2-169Generation principle P-CCPCH/BCHThe data blocks of BCH at transport-channel level comprise data determined for 20 ms of the P-CCPCH(i.e. 2 frames) after channel coding. The first field of such a data block is an 11-bit long field for thesystem frame number (SFN). The SFN is automatically incremented by 1 (as stipulated in the standard)from transport block to transport block (equivalent to a step width of 2 frames due to the transport timeinterval length of 20 ms). After 2048 transport blocks (equivalent to 4096 frames) SFN is reset andstarts again at 0 (SFN restart). An output trigger indicating the SFN restart can be generated (see2.14.2.1).The SFN format is defined in [6], sections 10.2.48, 11.2 (page 578) and 11.3 (page 691). It is MSB-firstcoded.The remaining system information (a 235-bit long field per block) is filled from the data source selectedfor the P-CCPCH under Specific Enhanced Channel Settings.A data list can be used to transmit further specific system information in addition to the SFN. If only theSFN is required, ALL 0 is recommended as data source for P-CCPCH.The BCH transport blocks are then channel-coded. A coded transport block comprises the datasequence for two P-CCPCH frames.1125.5555.03 2.242 E-9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!