Operating Manual Vol 1 - ES Documentation

Digital Standard GSM/EDGESMIQ(SELECT SLOT...)DUMMYBURST TYPEOpens a window for the selection of the burst type used toconfigure the selected slot.DUMMY Synchronization BurstIEC/IEEE-bus command SOUR:GSM:SLOT2:TYPE DUMMSLOT LEVELSelection of level for selected slot.OFF Maximum attenuationIEC/IEEE :SOUR:GSM:SLOT2:LEV OFFFULL The level corresponds to the value indicated onthe SMIQ LEVEL display.IEC/IEEE :SOUR:GSM:SLOT2:LEV FULLATTEN The level is reduced by the value set underSLOT ATTENUATION.IEC/IEEE .....:SOUR:GSM:SLOT2:LEV ATTTAILMIXEDGUARDDisplay of data content in the 3 bit data field "Tail ". The tailbits are set to 000 according to the GSM standard.Display of data content of the mixed-bit field. It has a datacontent stipulated by GSM 05.02, the so-called mixed bits":1111101101110110000010100100111000001001000100000001111100011100010111000101110001010111010010100011001100111001111010011111000100101111101010Display of data content in the Guard field in binary form. Thelength of the field is 8 bit in slots 1,2,3,5,6,7 and 9 bit in slots0 and 4. It is thus ensured that a frame has exactly 1250 bitas stipulated in the GSM standard.1125.5555.03 2.314 E-9