Operating Manual Vol 1 - ES Documentation

SMIQArbitrary Waveform Generator ARB2.21.2.1 ARB MOD - TRIGGER MenuFig. 2-219TRIGGER...ARB MOD - TRIGGER... menuOpens a window for setting the trigger facilities and the trigger outputs.TRIGGER SOURCEEXT TRIGGER DELAYEXT RETRIGGER INHIBITTRIGGER OUT1(2) POLTRIGGER OUT1(2) DELAYConfiguration of trigger source.INTEXTManually via EXECUTE TRIGGER or via software.IEC/IEEE bus command :ARB:TRIG:SOUR INTTriggering with active edge at input socket.IEC/IEEE bus command :ARB:TRIG:SOUR EXTDelays the start of sequence by the indicated samplesafter occurrence of an external trigger event. Theresolution is 2 samples with clock rates (CLOCK) above20 MHz (otherwise, 1 sample).IEC/IEEE bus command :ARB:TRIG:DEL 234Retriggering is inhibited until the sequence has reached theindicated sample.IEC/IEEE bus command :ARB:TRIG:INH 345Signal polarity at the trigger outputs.POS active state: positive voltageIEC/IEEE bus command:ARB:TRIG:OUTP1:POL POSNEG active state: 0 or lower voltageIEC/IEEE bus command:ARB:TRIG:OUTP2:POL NEGDelay of the supplied trigger signals by the set number ofsamples.IEC/IEEE bus command :ARB:TRIG:OUTP:DEL 7651125.5555.03 2.347 E-9