Operating Manual Vol 1 - ES Documentation

Digital Standard 3GPP W-CDMA (FDD)SMIQFig. 2-107DIGITAL STD - WCDMA/3GPP - Downlink - COPY BS(MS) menuCOPY BS(MS)...Using COPY BS (MS) it is easy to create a new base/mobile station from anexisting station. This feature is useful, say, when base stations with more than128 data channels are to be simulated. For examples, see section 2.14.3.6.2.SOURCE BS/MS For selecting the BS(MS) whose parameter set is to becopied. Possible values are 1, 2, 3 or 4.IEC/IEEE-bus command :SOUR:W3GP:COPY:SOUR 1DESTINATION For selecting the destination BS(MS) whose parameterBS/MS set is to be overwritten. Possible values are 1, 2, 3 or 4.IEC/IEEE-bus command :SOUR:W3GP:COPY:DEST 2CHANNELIZATIONCODE OFFSET Offset used for the spreading codes during copying fromthe source BS to the channelization codes. Theminimum value is 0 and the maximum value 511. Thisparameter is only available in the downlink.IEC/IEEE-bus command :SOUR:W3GP:COPY:COFF 123EXECUTE Starts copying.IEC/IEEE-bus command :SOUR:W3GP:COPY:EXECTRIGGER MODE Configuration of W-CDMA sequence control (see section 2.14.2.11).AUTOThe calculated W-CDMA chip sequence is immediatelyoutput and repeated cyclically. Trigger events are ignored.IEC/IEEE-bus command :SOUR:W3GP:SEQ AUTORETRIGThe calculated W-CDMA chip sequence is immediatelyoutput and repeated cyclically. A trigger event causes arestart from frame 1.IEC/IEEE-bus command :SOUR:W3GP:SEQ RETRARMED_AUTO Only a trigger event results in the W-CDMA chip sequencebeing started from frame 1. Other trigger events areignored.IEC/IEEE-bus command :SOUR:W3GP:SEQ AAUTARMED_RETRIG Only a trigger event results in the W-CDMA chip sequencebeing started from frame 1. Each further trigger eventcauses a restart.IEC/IEEE-bus command :SOUR:W3GP:SEQ ARET1125.5555.03 2.184E-9