particular specifications (road works) - CIDCO Maharashtra Ltd.

CIDCO OF MAHARASHTRA LTD
C.A.No.01/CIDCO/SE(KHR)/EE(KHR-I)/2010–11 Pg. No. 258
6) Excavation to the required lines, curves, section and grades.
7) Conveying the excavated materials including all lifts and lead
upto 50 m. (about 164’), spreading in layers or stacking as
directed and disposing off unwanted materials.
8) All labour, materials and use of equipment and tolls required
for completing the item satisfactorily.
9) Compensation on account of damages, accidents or use of
private lands royalty, etc.
3.13 MODE OF MEASUREMENT & PAYMENT:
The contract rate shall be for a unit of one cubic metre for the strata
mentioned in the wording of the items of excavation acceptably
completed, limited to the dimensions shown on the plans or as
directed by the Engineer. Excavation shall be measured in its original
position by the taking cross-sections before the work start and after it
is entirely completed. The quantity shall be worked out by the
Average End Area method. The individual dimensions and areas of
the cutting shall be measured correct upto two places of decimals of
a metre and square metre respectively and the quantity worked out
correct up to two places of decimals of a cubic metre.
When the classification of the strata changes, the contractor shall
bring this to the notice of the Engineer who will then verify and if
necessary take levels for the changed strata for purpose of
measurement.
The engineer at his option may direct dead-men to be left at such
intervals as he may indicate for purpose of measuring the depths
and other dimensions either for initial measurements or for