particular specifications (road works) - CIDCO Maharashtra Ltd.

CIDCO OF MAHARASHTRA LTD
C.A.No.01/CIDCO/SE(KHR)/EE(KHR-I)/2010–11 Pg. No. 267
4.11 ITEM TO INCLUDE :
1) Clearing site.
2) Setting out alignment including necessary labour and materials
and maintaining it as long as required.
3) Preparing the ground for laying the embankment.
4) Providing and maintaining diversions if necessary unless provided
as a separate item in the tender.
5) Obtaining the embankment materials including all lifts and leads
and laying the bank in layers, watering, compaction and tests
and Royalties, fees, Quarry Permit etc. if any.
6) Protecting and maintaining the bank.
7) Finishing the embankment.
8) All labour, materials, use of equipment, tools and plants
necessary for completing the work satisfactorily.
4.12 MODE OF MEASUREMENT AND PAYMENT :
The contract rate shall be per cu. metre of the finished bank work.
Measurements shall normally be taken by levelling sections and
chaining distances between them.
The measurements of the sections shall be limited to the dimensions
shown on the drawings or those ordered by the Engineer in writing.
The dimensions shall be recorded correct upto two places of decimals
of a metre. The sectional areas shall be worked out correct upto two
places of decimals of a sq.metre. The quantity shall be worked out
correct upto two places of decimals of a cu.m. by the average end
area method.