particular specifications (road works) - CIDCO Maharashtra Ltd.

CIDCO OF MAHARASHTRA LTD
C.A.No.01/CIDCO/SE(KHR)/EE(KHR-I)/2010–11 Pg. No. 403
11.2 Mode of Measurement and Payment :
The contract rate shall for one meter or part thereof pipe actually
laid. The measurement shall be over all the fittings along with the
centre line from end to end.
12.0 REINFORCEMENT:
12.1 STEEL:
Mild steel, round shall conform to IS :431. TMT/HYSD bars shall
conform to IS: 1786, hard drawn steel wire fabric shall conform to
IS:1566-1877, or rolled steel made from structural steel conforming
to IS: 226. Any other steel specific for reinforcement shall conform in
every respect to the latest relevant Indian Standard Specifications
and shall be of tested quality under the I.S.I. certifications scheme.
All reinforcing work for concrete work shall be executed in
conforming with the drawings supplied and instructions given by the
Engineer and shall generally be carried out in accordance with the
relevant Indian Standard Specifications IS:2502.
12.2 Inspection and Testing:
12.3 Lapping:
Every bar shall be inspected before assembling on the works and
any defective brittle, excessively rusted or burnt bars shall be
removed. Cracked ends of bars shall be cut out. Specimens sufficient
for three Tehsile Tests per 10 tonnes of bars and for each different
size shall be sampled and tested by the Contractor, batches shall be
rejected if the average results of each batch are not in accordance
with specifications.
As far as possible bars of the maximum length available shall be