particular specifications (road works) - CIDCO Maharashtra Ltd.

CIDCO OF MAHARASHTRA LTD
C.A.No.01/CIDCO/SE(KHR)/EE(KHR-I)/2010–11 Pg. No. 307
11.4.3 Geosynthetics :
Where Geosynthetics are specified in the contract this shall be in
accordance with the requirements stated in Clause 703 of M.O.R.T. &
H. Specifications (Fourth Revision).
11.4.4 Stress absorbing layer :
11.4.5 Tack coat :
Where a stress absorbing layer is specified in the contract, this shall be
applied in accordance with the requirements of Clause 522 of
M.O.R.T. & H. Specifications (Fourth Revision).
Where specified in the contract, or otherwise required by the Engineer,
tack coat shall be applied in accordance with the requirements of
Clause 503 of M.O.R.T. & H. Specifications (Fourth Revision).
11.4.6 Mixing and transportation of the mixture :
11.4.7 Spreading:
11.4.8 Rolling :
The provisions as specified in Clauses 501.3 and 501.4 of M.O.R.T. &
H. Specifications (Fourth Revision) shall apply.
The general provision of clauses 501.3.5 and 501.5.4 of M.O.R.T. &
H. Specifications (Fourth Revision) shall apply.
The general provisions of clauses 501.6 and 501.7 of M.O.R.T. & H.
Specifications (Fourth Revision) shall apply, as modified by the approved
laying trials.
11.5 OPENING OF TRAFFIC :
The newly laid surface shall not be open to traffic for at least 24 hours
after laying and the completion of compaction, without the express
approval of the Engineer in writing.