particular specifications (road works) - CIDCO Maharashtra Ltd.

CIDCO OF MAHARASHTRA LTD
C.A.No.01/CIDCO/SE(KHR)/EE(KHR-I)/2010–11 Pg. No. 289
9.7 SURFACE FINISH AND QUALITY CONTROL:
The surface finish shall conform to the requirements of Clause 902 of
specification for Roads and Bridges by Ministry of Road Transport &
Highways. Quality control test and their frequencies shall be as per
table 900-3 of specification for Roads and Bridges by Ministry of Road
Transport & Highways.
9.8 ARRANGEMENT OF TRAFFIC:
During the period of execution, arrangement of traffic shall be done as
per clause 112. (excluding past para of 112.6) of specification for
Roads and Bridges by Ministry of Road Transport and Highways.
9.9 ITEM TO INCLUDE:
1) Labour and materials required for preparing surface.
2) Supplying and spreading and compaction of 40mm hand
broken size metal and 20mm crushed metal.
3) Supplying, heating and spraying of bitumen.
4) Supplying and spreading and compaction of 12 mm crushed
metal.
9.10 MODE OF MEASUREMENT AND PAYMENT :
The Contract unit rate for finished work of bituminous bound
macadam is in full for carrying out all operations. The finished work
shall be measured in square meters.
10.0 DENSE GRADED BITUMINOUS MACADAM:
10.1 SCOPE:
This clause specifies the construction of Dense Graded Bituminous
Macadam (DBM), for use mainly, but not exclusively, in base/binder
and profile corrective courses. DBM is also intended for use as road