particular specifications (road works) - CIDCO Maharashtra Ltd.

CIDCO OF MAHARASHTRA LTD
C.A.No.01/CIDCO/SE(KHR)/EE(KHR-I)/2010–11 Pg. No. 259
checking. Deduction shall be made for these dead-men. These shall
be removed when no longer required and the deduction restored
thereafter. If the dead-men are not removed and used in the work or
otherwise disposed of as directed by the Engineer within 15 days of
the date of check measurement, the Engineer shall have the right to
remove then at the contractor’s cost. If for any reason the dead-men
are damaged at the time of measurement the measuring or check
measuring officer shall estimate the quantity of earthwork at his
discretion and such estimate shall be final.
4.0 Providing earthwork in embankment with approved materials
4.1 GENERAL :
obtained from contractor’s own source including all lifts and leads,
laying in layers of 20 cm. to 30 cm. thickness, breaking clods,
dressing to the required lines, curves, grades and section, watering
and compacting to 97% Modified Proctor Density Complete.
The work shall include preliminaries of clearing site, setting out and
preparing the ground and thereafter forming embankment for the
road with approved materials obtained from contractor’s own source,
laying in layers, watering and compacting to the required density and
lines, curves, grades, cross section and dimensions shown on the plan
or as directed by the Engineer with due allowance for shrinkage.
4.2 CLEARING SITE :
The ground over which embankment is to be formed shall be cleared
of all trees (unless cutting of trees of over 30 cm. girth is provided as
a separate item vide Rd.1), brushwood, loose stones, vegetation,
bushes, stumps and all other objectionable materials, under this item.