NAVY SCHOOL MANAGEMENT MANUAL

CCMM for audit trail purposes only. Refer to Chapter 4, Section
1. The type of planning document used will vary based on the
standard. For the purpose of the FCR, the following information
will be on file:
Training Project Plan (format will vary)
Approval letter (approval authority will vary)
Accurate milestones
Analysis
A copy of the analysis document and approval letters should
be maintained by the CCMM. For courses developed using the
different equipment based standards, applicable PPP tables
should be on file with the CCMM. Analysis documentation
and approval authority for courses developed using task
analysis standards will vary. The FCR should focus on the
following since the type of document on file is not
important.
Has an analysis been conducted?
Is the information in the course consistent with the
analysis?
Is the course material based on valid analysis
information?
If the information contained in the analysis document is
not current and/or not accurate, the findings will be
summarized in the summary sheets and recommendations
forwarded to the CCA for action. Possible recommended
actions include requests for Human Performance Requirements
Review or a complete job analysis.
Design
The design document should be approved by the appropriate
higher authority. The CCMM will provide the participating
sites with a copy of the appropriate design document. As
with the Planning and Analysis phases, the type of design
document, approval authority and document format will vary
between developmental standards. During the FCR the
emphasis should be placed on content and accuracy of the
document(s).
Are the objectives accurate?
Do they reflect the current needs of the Fleet?
G-3
NAVEDTRA 135C