NX Nastran DMAP Programmer's Guide - Kxcad.net

.
ELTPRT Prints element summary information
Prints information on elements.
Format:
Input Data Blocks:
Output Data Block:
Parameters:
ELTPRT
Prints element summary information
ELTPRT ECT,GPECT,BGPDT,UNUSED4,EST,CSTM,MPT,DIT,CASECC/
VELEM/
PROUT/S,N,ERROR/WTMASS $
ECT Element connectivity table.
GPECT Grid point element connection table.
BGPDT Basic grid point definition table.
UNUSED4 Unused and may be purged.
EST Element summary table.
CSTM Table of coordinate system transformation matrices.
MPT Table of Bulk Data entry images related to material properties for
ELSUM command.
DIT Table of TABLEij Bulk Data entry images for ELSUM command.
CASECC Table of Case Control command images.
VELEM Table of element lengths, areas, and volumes.
PROUT Input-integer-default = 0. Print control for options 1, 2, and 4 is listed in
Remark 1. This parameter is only meaningful if the input data block
ECT is specified.
For options 1 and 2, if PROUT is set to a positive integer value or to zero
(default), the output will include a list of the element types and the
identification numbers of all elements.
For option 4, if PROUT = 0 or 1, then VELEM is computed and printed.
If PROUT = 2, VELEM is computed but not printed.
101