NX Nastran DMAP Programmer's Guide - Kxcad.net

More documents

Recommendations

Info

942 DRMS1 Data recovery by mode superposition, Phase 1 DRMS1 Data recovery by mode superposition, Phase 1 To compute output transformation matrices for displacements, SPC forces, stresses, and element forces. The input data blocks are the type generated by the SDR2 module and formatted for the OFP module. Format: DRMS1 OFP1,OFP2,OFP3,OFP4/ TOFP1,MOFP1,TOFP2,MOFP2,TOFP3,MOFP3,TOFP4,MOFP4/ NCOL $ Input Data Blocks: OFPi Output table in SORT1 format usually created by the SDR2 module. Output Data Blocks: TOFPi Directory table for MOFPi. MOFPi Matrix form of the i-th output table. Parameter: NCOL Input-integer-default=0. Number of columns (i.e.; subcases, modes, time steps or frequencies) desired in the output matrices. By default, all data records will be converted into the output matrices. If NCOL is less than the number of data records in the input table, then the first NCOL records are converted and the remaining records are ignored. Remarks: 1. SDR2 output data blocks (OFPi) are input data blocks for this module. Module DRMS1 generates the output transformation matrix (MOFPi) and associated directory table (TOFPi) from each of the input data blocks. 2. There are some data in OFPi for the output transformation that may not be given linear combination operations, such as margins of safety and principal stresses. This irrelevant data will be eliminated from the output transformation matrix. Components that are retained in the matrix MOFPi are indicated in the table of element stress output data description. 3. All the output transformation matrices will have as many columns as the number of modes or loading conditions specified in PARAM, NCOL. Each column will contain all the relevant components of GRIDs (T1, T2, etc.) or elements (σ x , σ y, etc.) for all the GRIDs or elements retained in the input data blocks.
4. Directory tables contain the mapping information as follows: • RECORD 0 - Header record, indicating. • Type of data (φ, q, σ, or F). DRMS1 Data recovery by mode superposition, Phase 1 • Format code (real, real/imaginary or magnitude/phase). • RECORD 1 - Identification of the columns, providing • Column numbers of the associated matrix. • Natural frequencies (f n ). • RECORD 2 - Identification of the rows, providing • Type code of points or elements. • ID number of points or elements. • Number of components of the point or element retained in the associated matrix. • Starting row number of the point or element with reference to the associated matrix. See the OES, OEF, OUG, and OQG table descriptions in “+” on page 757. • Matrix trailer output, indicating the size of the associated matrix. 943
Page 1 and 2:
NX Nastran DMAP Programmer’s Guid
Page 3 and 4:
1 Direct Matrix Abstraction C O N T
Page 5 and 6:
❑ Miscellaneous Modules and State
Page 7 and 8:
- MODEPT, 1209 - MODGDN, 1210 - MOD
Page 9 and 10:
CHAPTER 1 NX Nastran DMAP Programme
Page 11 and 12:
1.2 The NX Nastran DMAP Language Th
Page 13 and 14:
Constant Parameters Parameters A co
Page 15 and 16:
Parameters 4. Value from the NAME=v
Page 17 and 18:
Parameters For example, the followi
Page 19 and 20:
Relational Operators Parameters Rel
Page 21 and 22:
1.4 Data Blocks Data Blocks A data
Page 23 and 24:
Form is defined as one of the follo
Page 25 and 26:
1.5 Instructions Instructions A DMA
Page 27 and 28:
MPYAD A , B , / D $ Instructions Ac
Page 29 and 30:
Instructions Type conversions can b
Page 31 and 32:
Format Definition Result ATAN2( x1,
Page 33 and 34:
Format Definition Result DIM( x1, x
Page 35 and 36:
Format Definition Result LLT( a1, a
Page 37 and 38:
Format Definition Result NUMGT(x1,x
Page 39 and 40:
Format Definition Result Instructio
Page 41 and 42:
Control Statement The NX Nastran DM
Page 43 and 44:
DO WHILE(expression) $ . . . ENDDO
Page 45 and 46:
SUBDMAP TEST X,Y,Z/L,M,N/A1/A2/A3 $
Page 47 and 48:
1.6 “Output from a Previous Modul
Page 49 and 50:
1.8 Preface Modules and SOLution 10
Page 51 and 52:
SubDMAPs DBMGR, DBSTORE, and DBFETC
Page 53 and 54:
1.11 WHERE and CONVERT Clauses WHER
Page 55 and 56:
Examples of the CONVERT clause are:
Page 57 and 58:
What's New in DMAP? Option 39: Remo
Page 59 and 60:
Page 61 and 62:
2.2 Matrix Data Blocks The rows and
Page 63 and 64:
2.3 Table Data Blocks This section
Page 65 and 66:
OFP Tables The header record of all
Page 67 and 68:
Examples: Therefore, MOD(approach_c
Page 69 and 70:
Type Chapter 2 Name 23 OELOP1 Summa
Page 71 and 72:
Stress_code In the OES data block d
Page 73 and 74:
Type Name Description 23 DAMP4 Scal
Page 75 and 76:
Type Name Description 76 HEXPR Acou
Page 77 and 78:
Type Name Description 129 Unused (P
Page 79 and 80:
Type Name Description 183 Unused (P
Page 81 and 82:
Type Name Description 223 QUADXFD H
Page 83 and 84:
2.5 Data Block Descriptions BGPDT B
Page 85 and 86:
BGPDT68 Basic grid point definition
Page 87 and 88:
Word Name Type Description CASECC C
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Word Name Type Description 318 UNDE
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
• 4 = punch and their sums; e.g.,
Page 105 and 106:
CLAMA Complex eigenvalue summary ta
Page 107 and 108:
CONTAB Design constraint table CONT
Page 109 and 110:
CONTACT Table of Bulk Data entry re
Page 111 and 112:
CSTM Coordinate system transformati
Page 113 and 114:
CSTM68 Coordinate system transforma
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Record 2 - TRAILER Notes: 1. Coordi
Page 121 and 122:
Record 5 - INITV DBCOPT Design opti
Page 123 and 124:
DESTAB Design variable attributes R
Page 125 and 126:
Word Name Type Description 5 F0 RS
Page 127 and 128:
Record 12 - TABLES1(3105,31,97) Wor
Page 129 and 130:
DSCMCOL Design sensitivity paramete
Page 131 and 132:
Word Name Type Description 5 COMP I
Page 133 and 134:
Word Name Type Description 5 COMP I
Page 135 and 136:
Word Name Type Description 6 UNDEF(
Page 137 and 138:
DVPTAB Designed property table Reco
Page 139 and 140:
DYNAMIC Table of Bulk Data entry im
Page 141 and 142:
Record 7 - EIGB(107,1,86) DYNAMIC T
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
EGPSF Table of element to grid poin
Page 155 and 156:
3. Possible values for items in REC
Page 157 and 158:
EGPSTR Element grid point stress ta
Page 159 and 160:
Word Name Type Description End TYPE
Page 161 and 162:
ELDCT Element stress discontinuity
Page 163 and 164:
EPT Element property table Record 0
Page 165 and 166:
Word Name Type Description Record 5
Page 167 and 168:
Word Name Type Description EPT Elem
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Word Name Type Description 21 K1 RS
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Record 18 - PDAMPT(1202,12,33) Word
Page 185 and 186:
Record 29 - PELAS(302,3,46) Word Na
Page 187 and 188:
Record 35 - PLPLANE(4606,46,375) Wo
Page 189 and 190:
Record 41 - PSOLID(2402,24,281) Wor
Page 191 and 192:
Record 46 - PVAL(10201,102,400) Wor
Page 193 and 194:
Page 195 and 196:
EQEXIN Equivalence between external
Page 197 and 198:
ERROR Table of p-element error tole
Page 199 and 200:
GEOM1 Table of Bulk Data entry imag
Page 201 and 202:
Record 5 - CORD2R(2101,21,8) GEOM1
Page 203 and 204:
Record 10 - FEEDGE(6101,61,388) GEO
Page 205 and 206:
Record 15 - GMCORD(6401,64,402) GEO
Page 207 and 208:
Record 20 - SEELT(7902,79,302) GEOM
Page 209 and 210:
Record 25 - SENQSET(1327,13,464) GE
Page 211 and 212:
Record 32 - CSUPUP(5801,58,324) Thi
Page 213 and 214:
GEOM168 Table of Bulk Data entry im
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Record 16 - GRID(4501,45,1) GEOM168
Page 221 and 222:
Record 22 - SELABEL(1027,10,459) GE
Page 223 and 224:
Record 28 - SESET(5601,56,296) GEOM
Page 225 and 226:
Record 33 - TRAILER GEOM168 Table o
Page 227 and 228:
GEOM2 Table of Bulk Data entries re
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Record 19 - CDUM2(6208,62,108) GEOM
Page 239 and 240:
Record 29 - CELAS3(801,8,75) GEOM2
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Record 43 - CHEXAFD(14000,140,9990)
Page 247 and 248:
Record 51 - CMFREE(2508,25,0) GEOM2
Page 249 and 250:
Page 251 and 252:
Record 65 - CQUAD4(2958,51,177) Rec
Page 253 and 254:
Record 72 - CROD(3001,30,48) GEOM2
Page 255 and 256:
Record 81 - CTRIA3(5959,59,282) GEO
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Record104 - SINT(7801,78,8883) GEOM
Page 267 and 268:
Record110 - TRAILER Notes: 1. Recor
Page 269 and 270:
Record 4 - GMLOAD(6309,63,391) GEOM
Page 271 and 272:
Page 273 and 274:
Record 13 - MOMENT2(4701,47,23) GEO
Page 275 and 276:
Record 20 - PLOADX1(7309,73,351) GE
Page 277 and 278:
Record 27 - QVOL(2309,23,416) GEOM3
Page 279 and 280:
Record 35 - TEMPP1(8109,81,201) GEO
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Record 19 - OMIT1(4951,63,92) GEOM4
Page 293 and 294:
Record 24 - RBE2(6901,69,295) GEOM4
Page 295 and 296:
Page 297 and 298:
Record 31 - RWELD(11901,119,561) GE
Page 299 and 300:
Record 37 - SEQSET1(1210,12,322) GE
Page 301 and 302:
Page 303 and 304:
Record 49 - SPCEB(9101,91,9025) GEO
Page 305 and 306:
Record 56 - SUPORT(5601,56,14) GEOM
Page 307 and 308:
GPDT68 Grid point definition table
Page 309 and 310:
HIS Table of design iteration histo
Page 311 and 312:
Record 2 - TRAILER KDICT Element st
Page 313 and 314:
Record 3 - TRAILER LAMA Normal mode
Page 315 and 316:
MPT Table of Bulk Data entry images
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
Record 13 - MATHP(4506,45,374) MPT
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Record 24 - RADMT(8902,89,423) MPT
Page 331 and 332:
Page 333 and 334:
OBC Output contact pressure and tra
Page 335 and 336:
OBJTAB Design objective table OBJTA
Page 337 and 338:
OEE Output element energy (strain,
Page 339 and 340:
OEE Output element energy (strain,
Page 341 and 342:
OEF Table of element forces OEF Tab
Page 343 and 344:
Word Name Type Description 6 UNDEF(
Page 345 and 346:
Word Name Type Description 5 FREECO
Page 347 and 348:
Word Name Type Description 12 YFLUX
Page 349 and 350:
Word Name Type Description OEF Tabl
Page 351 and 352:
Word Name Type Description 8 F34R R
Page 353 and 354:
Page 355 and 356:
Word Name Type Description TCODE,7
Page 357 and 358:
Word Name Type Description ELTYPE =
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Word Name Type Description 2 AXR RS
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Word Name Type Description 10 PRESS
Page 373 and 374:
Word Name Type Description 7 BMX RS
Page 375 and 376:
Word Name Type Description 10 AZI R
Page 377 and 378:
Word Name Type Description 7 AF RS
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Word Name Type Description 23 UNDEF
Page 389 and 390:
Page 391 and 392:
Word Name Type Description 9 TRQ RS
Page 393 and 394:
Word Name Type Description 15 TS2I
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
2 NX Nastran DMAP Modules and Data
Page 401 and 402:
OES Table of element stresses or st
Page 403 and 404:
Word Name Type Description 3 NX1 RS
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Word Name Type Description 3 AEI RS
Page 411 and 412:
Word Name Type Description End TCOD
Page 413 and 414:
Page 415 and 416:
Word Name Type Description 3 SX1R R
Page 417 and 418:
Word Name Type Description 2 SX1A R
Page 419 and 420:
Page 421 and 422:
Word Name Type Description 16 EP2 R
Page 423 and 424:
Word Name Type Description 25 P3Z R
Page 425 and 426:
Word Name Type Description 2 RA RS
Page 427 and 428:
Word Name Type Description 11 TE4 R
Page 429 and 430:
Word Name Type Description 4 TE1R R
Page 431 and 432:
Word Name Type Description 2 SR(9)
Page 433 and 434:
Word Name Type Description 12 FD2 R
Page 435 and 436:
Word Name Type Description 6 SX1I R
Page 437 and 438:
Word Name Type Description 8 EZR RS
Page 439 and 440:
Word Name Type Description 16 TYZI
Page 441 and 442:
Word Name Type Description 2 CID I
Page 443 and 444:
Word Name Type Description 8 EMAX R
Page 445 and 446:
Word Name Type Description 8 A1 RS
Page 447 and 448:
Word Name Type Description 2 TERM C
Page 449 and 450:
Word Name Type Description 12 EY2R
Page 451 and 452:
Word Name Type Description 14 EY2 R
Page 453 and 454:
Word Name Type Description 8 SY1I R
Page 455 and 456:
Word Name Type Description 7 EY1R R
Page 457 and 458:
Page 459 and 460:
Word Name Type Description 2 FD1 RS
Page 461 and 462:
Word Name Type Description 11 EY1 R
Page 463 and 464:
Word Name Type Description 13 EX RS
Page 465 and 466:
Word Name Type Description 49 TEFB
Page 467 and 468:
Word Name Type Description 5 ET1 RS
Page 469 and 470:
Word Name Type Description 9 EMIN R
Page 471 and 472:
Word Name Type Description 4 ABSORB
Page 473 and 474:
Page 475 and 476:
Word Name Type Description 3 GRID I
Page 477 and 478:
Word Name Type Description OES Tabl
Page 479 and 480:
Word Name Type Description 11 YNORM
Page 481 and 482:
Word Name Type Description 8 TYZ RS
Page 483 and 484:
Page 485 and 486:
Word Name Type Description 9 SMI RS
Page 487 and 488:
Word Name Type Description 20 CX RS
Page 489 and 490:
Word Name Type Description 8 SMJ RS
Page 491 and 492:
Word Name Type Description 19 TYZR
Page 493 and 494:
Word Name Type Description 20 TZX1R
Page 495 and 496:
Page 497 and 498:
Word Name Type Description 26 TXY2R
Page 499 and 500:
Page 501 and 502:
Word Name Type Description 7 SXY RS
Page 503 and 504:
Word Name Type Description 11 VOLST
Page 505 and 506:
Word Name Type Description 15 EXY R
Page 507 and 508:
Word Name Type Description 9 VOLSTR
Page 509 and 510:
Word Name Type Description 3 ID I 4
Page 511 and 512:
Word Name Type Description 7 SXY RS
Page 513 and 514:
Word Name Type Description 10 ETZ R
Page 515 and 516:
Word Name Type Description 11 SX2 R
Page 517 and 518:
Word Name Type Description 14 EXY2R
Page 519 and 520:
Word Name Type Description 7 SL2 RS
Page 521 and 522:
OGF Table of grid point forces Tabl
Page 523 and 524:
Word Name Type Description OGF Tabl
Page 525 and 526:
OGK Output gasket element results F
Page 527 and 528:
OGS Table of grid point stresses/st
Page 529 and 530:
Page 531 and 532:
Page 533 and 534:
4. Output coordinate system code 1
Page 535 and 536:
Record 2 - DATA Record 3 - TRAILER
Page 537 and 538:
OMEOSCTable of oscillating total mo
Page 539 and 540:
5 = print and punch 4. Approach cod
Page 541 and 542:
Page 543 and 544:
OMKEO Table of oscillating modal ki
Page 545 and 546:
Page 547 and 548:
Page 549 and 550:
OMSEO Table of oscillating modal st
Page 551 and 552:
Page 553 and 554:
Word Name Type Description ACODE =0
Page 555 and 556:
Word Name Type Description OPG Tabl
Page 557 and 558:
OPTPRM Table of optimization parame
Page 559 and 560:
OQG OQG Table of single or multipoi
Page 561 and 562:
OQG Table of single or multipoint c
Page 563 and 564:
OQG Table of single or multipoint c
Page 565 and 566:
OUG Table of displacements, velocit
Page 567 and 568:
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
R1MAP Table of mapping from origina
Page 579 and 580:
R1TAB Table of type one response at
Page 581 and 582:
R1TAB Table of type one response at
Page 583 and 584:
Record 2 - TRAILER R1TAB Table of t
Page 585 and 586:
RESP12 Table of second level (synth
Page 587 and 588:
Record 2 - TRAILER RESP12 Table of
Page 589 and 590:
Word Name Type Description Word 13
Page 591 and 592:
SEMAP Superelement Definition Table
Page 593 and 594:
SET Table of combined sets Record 0
Page 595 and 596:
VIEWTB View information table VIEWT
Page 597 and 598:
Page 599 and 600:
Chapter 4 Name Chapter 2 Name Descr
Page 601 and 602:
Page 603 and 604:
Page 605 and 606:
Page 607 and 608:
Page 609 and 610:
Page 611 and 612:
Page 613 and 614:
Page 615 and 616:
Page 617 and 618:
Page 619 and 620:
Page 621 and 622:
Page 623 and 624:
Page 625 and 626:
Page 627 and 628:
Page 629 and 630:
Page 631 and 632:
Page 633 and 634:
Page 635 and 636:
Page 637 and 638:
Page 639 and 640:
Page 641 and 642:
Page 643 and 644:
Page 645 and 646:
Page 647 and 648:
Page 649 and 650:
Page 651 and 652:
Page 653 and 654:
Page 655 and 656:
Page 657 and 658:
Page 659 and 660:
Page 661 and 662:
Page 663 and 664:
Page 665 and 666:
Page 667 and 668:
Page 669 and 670:
Page 671 and 672:
Page 673 and 674:
Page 675 and 676:
Page 677 and 678:
Page 679 and 680:
Page 681 and 682:
Page 683 and 684:
Page 685 and 686:
Data Block Naming Conventions Stiff
Page 687 and 688:
Solutions: ___U___ Static and dynam
Page 689 and 690:
Solution Output Tables: O__ES__ Ele
Page 691 and 692:
Inconsistent Names: BUG Buckling ei
Page 693 and 694:
Name Type and Description 'DYNAMICS
Page 695 and 696:
Name Type and Description BUCKCC Lo
Page 697 and 698:
Name Type and Description -1 Lumped
Page 699 and 700:
Name Type and Description DFRQCC Lo
Page 701 and 702:
Name Type and Description DTMi Inte
Page 703 and 704:
Name Type and Description EXISTS Ch
Page 705 and 706:
Name Type and Description FOUND Int
Page 707 and 708:
Name Type and Description 2 Cubic s
Page 709 and 710:
Name Type and Description 2 Insuffi
Page 711 and 712:
Name Type and Description LINC Inte
Page 713 and 714:
Name Type and Description MAXSET In
Page 715 and 716:
Name Type and Description MPFSORT I
Page 717 and 718:
Name Type and Description NE Intege
Page 719 and 720:
Name Type and Description NOA Integ
Page 721 and 722:
Name Type and Description NOGOIFPi
Page 723 and 724:
Name Type and Description NOMR Inte
Page 725 and 726:
Name Type and Description NORM Char
Page 727 and 728:
Name Type and Description NOUNIT In
Page 729 and 730:
Name Type and Description NLITER an
Page 731 and 732:
Name Type and Description 'WHOLE' R
Page 733 and 734:
Name Type and Description POUTF Int
Page 735 and 736:
Name Type and Description RCOLLBLi
Page 737 and 738:
Name Type and Description SEFLAG Lo
Page 739 and 740:
Name Type and Description SID Integ
Page 741 and 742:
Name Type and Description 2 Maximum
Page 743 and 744:
Name Type and Description TINY Real
Page 745 and 746:
Name Type and Description VUTRIA3 C
Page 747 and 748:
Page 749 and 750:
3.2 Detailed Description of NDDL St
Page 751 and 752:
DATABLK Describes data blocks used
Page 753 and 754:
where: Keywords: Variables: DATABLK
Page 755 and 756:
DATABLK Describes data blocks used
Page 757 and 758:
ENTRY, SET,I, ENDENTRY,COUNT=LSET,
Page 759 and 760:
Examples: 1. EPTS example: DEPEN Sp
Page 761 and 762:
PARAM Defines parameters requiring
Page 763 and 764:
QUAL Defines qualifiers referenced
Page 765 and 766:
Page 767 and 768:
Utility Modules APPEND COPY DBC DBD
Page 769 and 770:
761 GETCOL GETMKL GI GKAM GNFM GP0
Page 771 and 772:
UMERGE1 UPARTN Module Basic Operati
Page 773 and 774:
Executive Modules and Statements Mo
Page 775 and 776:
ACMG Computes fluid/structure coupl
Page 777 and 778:
ACMG Computes fluid/structure coupl
Page 779 and 780:
ADAPT Performs and prints error est
Page 781 and 782:
ADD Matrix add Computes [ X] = α[
Page 783 and 784:
ADD5 Matrix add ADD5 Matrix add To
Page 785 and 786:
4. Change the type of the real doub
Page 787 and 788:
Parameters: Remarks: 1. NK, and NJ
Page 789 and 790:
2. PKF cannot be purged. Examples:
Page 791 and 792:
Remarks: AELOOP Aerodynamic loop dr
Page 793 and 794:
AMG Builds aerodynamic influence ma
Page 795 and 796:
AMP Generates modal aerodynamic mat
Page 797 and 798:
APD Generates aerodynamic geometry
Page 799 and 800:
MODLTYPE='AEROSTRC' $ APD EDT,xCSTM
Page 801 and 802:
APPEND Concatenate two data blocks
Page 803 and 804:
FILE U=APPEND $ MATGEN ,/US/5/1/7 $
Page 805 and 806:
ASDR Prints the extra point aerodyn
Page 807 and 808:
Parameter: ASG Computes the aerodyn
Page 809 and 810:
AXMPR1 Builds a list of auxiliary m
Page 811 and 812:
BCDR Drives a boundary condition lo
Page 813 and 814:
BDRYINFO Generates geometry and con
Page 815 and 816:
BGP Processes geometry for boundary
Page 817 and 818:
BNDSPC Processes constraints on sup
Page 819 and 820:
. CASE Dynamic analysis case contro
Page 821 and 822:
CASE Dynamic analysis case control
Page 823 and 824:
Examples: CASE Dynamic analysis cas
Page 825 and 826:
CEAD Complex or unsymmetric eigenva
Page 827 and 828:
CMPZPR Generates Bulk Data entry im
Page 829 and 830:
CURV Transforms elemental centroid
Page 831 and 832:
CURVPLOT Converts grid point output
Page 833 and 834:
CYCLIC1 Generates cyclic symmetry t
Page 835 and 836:
CYCLIC2 Processes degrees-of-freedo
Page 837 and 838:
CYCLIC3 Forms cyclic matrices CYCLI
Page 839 and 840:
CYCLIC4 Transforms cyclic component
Page 841 and 842:
Examples: 1. Static analysis: CYCLI
Page 843 and 844:
DBC Database converter for model ge
Page 845 and 846:
Remarks: 1. Data block name table:
Page 847 and 848:
Generic Name (P1-P20) Chapter 2 Nam
Page 849 and 850:
DBC Database converter for model ge
Page 851 and 852:
DBDELETE Deletes NDDL data blocks a
Page 853 and 854:
DBDICT Prints database directory ta
Page 855 and 856:
Page 857 and 858:
Page 859 and 860:
Column name Table 4-1 DBDICT DATABL
Page 861 and 862:
Column name Default column width Ta
Page 863 and 864:
Page 865 and 866:
Page 867 and 868:
and looks like: COLSPACE=1 ,CDATE=1
Page 869 and 870:
DBEQUIV Equivalences (or copies) ND
Page 871 and 872:
DBEQUIV Equivalences (or copies) ND
Page 873 and 874:
SubDMAP DBMGR Functions on data blo
Page 875 and 876:
Format: Parameters: SubDMAP DBMGR F
Page 877 and 878:
SubDMAP DBSTORE Stores data blocks
Page 879 and 880:
DBVIEW DBVIEW Creates virtual data
Page 881 and 882:
DCMP Matrix decomposition with exte
Page 883 and 884:
DCMP Matrix decomposition with exte
Page 885 and 886:
DDR2 Computes displacements due to
Page 887 and 888:
DDR2 Computes displacements due to
Page 889 and 890:
Parameters: DDRMM Performs matrix m
Page 891 and 892:
0 Use standard decomposition (defau
Page 893 and 894:
DECOMP Matrix decomposition 3. If t
Page 895 and 896:
DELETE Deletes data blocks Format:
Page 897 and 898:
DIAGONAL Extracts diagonal from mat
Page 899 and 900: DISDCMP Performs distributed decomp
Page 901 and 902: DISOFPM Collects and merges OFP dat
Page 903 and 904: DISOPT Performs appropriate discret
Page 905 and 906: Output Data Blocks DISOPT Performs
Page 907 and 908: Input Data Blocks: DISUTIL Broadcas
Page 909 and 910: d. Strain energy (external work) 3.
Page 911 and 912: Remark: DIVERG Performs aerostatic
Page 913 and 914: DOM10 Prints initial and final resu
Page 915 and 916: DOM10 Prints initial and final resu
Page 917 and 918: GEOM2N Updated (optimized) GEOM2 MP
Page 919 and 920: DOM12 Performs soft and hard conver
Page 921 and 922: DOM12 Performs soft and hard conver
Page 923 and 924: DOM6 Calculates sensitivity of all
Page 925 and 926: DOM9 Performs the approximate optim
Page 927 and 928: PROPO Matrix of final (optimized) p
Page 929 and 930: DOPFS Performs optimization of the
Page 931 and 932: PROPI* Family of matrices of initia
Page 933 and 934: Parameters: DOPR2 Preprocesses the
Page 935 and 936: DOPR3 Preprocesses DCONSTR, DRESP1,
Page 937 and 938: DOPR4 Creates design sensitivity ta
Page 939 and 940: Parameters: STPSCL Input-real-defau
Page 941 and 942: DOPR6 Generates tables relating to
Page 943 and 944: DPD DPD Creates tables from Bulk Da
Page 945 and 946: UNUSED12 Input-integer-default=0. U
Page 947 and 948: DRMH1 Converts data recovery tables
Page 949: DRMH3 Partitions tables for each su
Page 953 and 954: Parameters: DSABO Incorporates elem
Page 955 and 956: DSAD Processes tables related to de
Page 957 and 958: DRDUG Matrix of adjoint loads for t
Page 959 and 960: DSAD Processes tables related to de
Page 961 and 962: XTYPE Input-integer-default=0. Type
Page 963 and 964: DSAE Merges tables to evaluate resp
Page 965 and 966: Output Data Blocks: DSAF Generates
Page 967 and 968: DSAH Generates data blocks required
Page 969 and 970: DSAJ Generates g-set size reduced b
Page 971 and 972: DSAL Generates design sensitivity c
Page 973 and 974: Remark: 1 Eigenvalue (radian/time)
Page 975 and 976: DSAN Generates design sensitivity p
Page 977 and 978: Parameters: DSAP Computes an inerti
Page 979 and 980: DSAR Extracts and truncates data fr
Page 981 and 982: DSARLP DSARLP Calculates pseudo-dis
Page 983 and 984: DSARME Computes RMS values Computes
Page 985 and 986: DSARSN Calculates delta response va
Page 987 and 988: DSDVRG DSDVRG Computes weighting fa
Page 989 and 990: DSFLTF Calculates sensitivity of ac
Page 991 and 992: Remarks: 1. DSMA is applicable only
Page 993 and 994: DSPRM Sets design sensitivity param
Page 995 and 996: DSTA Creates tables for Old Design
Page 997 and 998: DSTA Creates tables for Old Design
Page 999 and 1000: DSVG1 Creates pseudo loads or scala
Page 1001 and 1002:
DSVG1P DSVG1P Creates pseudo loads
Page 1003 and 1004:
DSVG2 Generates pseudo-load matrix
Page 1005 and 1006:
DSVG3 DSVG3 Combines and appends so
Page 1007 and 1008:
Remark: DSVGP4 Generates a perturbe
Page 1009 and 1010:
Remark: DSVGP5 Performs multiplicat
Page 1011 and 1012:
DUMMOD1 DUMMOD1 Provides dummy modu
Page 1013 and 1014:
DUMMOD3 DUMMOD3 Provides dummy modu
Page 1015 and 1016:
DVIEWP DVIEWP Generates view-elemen
Page 1017 and 1018:
DYNREDU Computes approximate eigenv
Page 1019 and 1020:
EFFMASS Computes modal effective ma
Page 1021 and 1022:
. ELTPRT Prints element summary inf
Page 1023 and 1024:
ELTPRT Prints element summary infor
Page 1025 and 1026:
EMAKFR Generates stiffness for foll
Page 1027 and 1028:
Output Data Blocks: EMG Computes el
Page 1029 and 1030:
EMG Computes elemental matrices ALT
Page 1031 and 1032:
EQUIVX Data block name equivalence
Page 1033 and 1034:
FA1 Prepares the modal matrices for
Page 1035 and 1036:
FA2 Collects aeroelastic flutter da
Page 1037 and 1038:
FBS Matrix forward/backward substit
Page 1039 and 1040:
FILE Data block declaration Declare
Page 1041 and 1042:
FORTIO Opens or closes a FORTRAN fi
Page 1043 and 1044:
FRLG Generates frequency-dependent
Page 1045 and 1046:
FRLGEN Creates frequency response l
Page 1047 and 1048:
FRRD1 Solves for the steady-state f
Page 1049 and 1050:
FRRD1 Solves for the steady-state f
Page 1051 and 1052:
Output Data Blocks: Parameters: FRR
Page 1053 and 1054:
GETCOL Reads STATSUB Case Control c
Page 1055 and 1056:
Generates the aerodynamic spline tr
Page 1057 and 1058:
GKAM Assembles modal mass, damping
Page 1059 and 1060:
GP0 Modifies tables to include p-el
Page 1061 and 1062:
GP1 Performs basic geometry process
Page 1063 and 1064:
GP2 Processes element connectivity
Page 1065 and 1066:
3. ETT may be purged if there are n
Page 1067 and 1068:
Output Data Blocks: RMG Multipoint
Page 1069 and 1070:
GP5 GP5 Creates table of static loa
Page 1071 and 1072:
Computes grid point forces and elem
Page 1073 and 1074:
GPFDR Computes grid point forces an
Page 1075 and 1076:
GPSP Performs auto-SPC operation Pe
Page 1077 and 1078:
Remarks: 1. YS0 and YS may be purge
Page 1079 and 1080:
GPSTR2 Computes grid point stresses
Page 1081 and 1082:
GPWG Computes center of mass of str
Page 1083 and 1084:
GUST Computes loads for aerodynamic
Page 1085 and 1086:
IFP Reads Bulk Data Section Reads i
Page 1087 and 1088:
Example: IFP Reads Bulk Data Sectio
Page 1089 and 1090:
IFP1 Reads Case Control Section Rea
Page 1091 and 1092:
IFP3 Modifies Bulk Data entry recor
Page 1093 and 1094:
Processes hydroelastic-related Bulk
Page 1095 and 1096:
Process acoustic cavity-related Bul
Page 1097 and 1098:
IFP6 Creates PSHELL and MAT2 Bulk D
Page 1099 and 1100:
IFP7 Creates PBEAM Bulk Data entry
Page 1101 and 1102:
IFP9 Creates PBAR and PBEAM Bulk Da
Page 1103 and 1104:
IFT Performs an inverse Fourier tra
Page 1105 and 1106:
ITAPE Value +n No 0 No -1 Yes Tape
Page 1107 and 1108:
INPUTT4 Inputs a matrix from a FORT
Page 1109 and 1110:
INTERR Generates modal components o
Page 1111 and 1112:
ISHELL Invokes an external program
Page 1113 and 1114:
Parameters: LAMX Eigenvalue Table E
Page 1115 and 1116:
LAMX Eigenvalue Table Editor Exampl
Page 1117 and 1118:
LANCZOS Performs real eigenvalue an
Page 1119 and 1120:
3 Detailed output on cost and conve
Page 1121 and 1122:
LMATPRT Prints combined design sens
Page 1123 and 1124:
1115 MAKAEFA Extracts data specifie
Page 1125 and 1126:
1117 MAKAEFS Generates an index and
Page 1127 and 1128:
1119 MAKCOMP Extracts components fr
Page 1129 and 1130:
1121 MAKENEW Converts tables from p
Page 1131 and 1132:
1123 MAKEOLD Converts tables from V
Page 1133 and 1134:
1125 MAKETR Generates transformatio
Page 1135 and 1136:
1127 MATGEN Matrix generator MATGEN
Page 1137 and 1138:
1129 MATGEN Matrix generator Input
Page 1139 and 1140:
1131 MATGEN Matrix generator MATGEN
Page 1141 and 1142:
1133 MATGEN Matrix generator Option
Page 1143 and 1144:
1135 MATGEN Matrix generator The eq
Page 1145 and 1146:
1137 MATGEN Matrix generator Option
Page 1147 and 1148:
1139 MATGPR Degree-of-freedom matri
Page 1149 and 1150:
Page 1151 and 1152:
Page 1153 and 1154:
1145 MATMOD Matrix modification MAT
Page 1155 and 1156:
1147 MATMOD Matrix modification Out
Page 1157 and 1158:
1149 MATMOD Matrix modification Opt
Page 1159 and 1160:
1151 MATMOD Matrix modification Inp
Page 1161 and 1162:
1153 MATMOD Matrix modification For
Page 1163 and 1164:
1155 MATMOD Matrix modification Rem
Page 1165 and 1166:
Page 1167 and 1168:
1159 MATMOD Matrix modification Par
Page 1169 and 1170:
Page 1171 and 1172:
Page 1173 and 1174:
1165 MATMOD Matrix modification 2.
Page 1175 and 1176:
1167 MATMOD Matrix modification MAT
Page 1177 and 1178:
Page 1179 and 1180:
Page 1181 and 1182:
1173 MATMOD Matrix modification P1=
Page 1183 and 1184:
1175 MATMOD Matrix modification Rem
Page 1185 and 1186:
Page 1187 and 1188:
1179 MATPCH Punches contents of Mat
Page 1189 and 1190:
1181 MATPRT Matrix printer MATPRT M
Page 1191 and 1192:
1183 MATREDU Reduces square matrix
Page 1193 and 1194:
1185 MCE2 Performs multipoint const
Page 1195 and 1196:
1187 MDCASE Partitions the Case Con
Page 1197 and 1198:
1189 MDCASE Partitions the Case Con
Page 1199 and 1200:
1191 MERGE Matrix merge MERGE Matri
Page 1201 and 1202:
1193 MERGE Matrix merge Case 4: Nei
Page 1203 and 1204:
1195 MERGE Matrix merge then the re
Page 1205 and 1206:
1197 MESSAGE Prints messages MESSAG
Page 1207 and 1208:
1199 MKCNTRL Creates virtual fluid
Page 1209 and 1210:
1201 MKSPLINE Generates splines to
Page 1211 and 1212:
1203 MODACC OFREQ and OTIME command
Page 1213 and 1214:
1205 MODEPF OFREQ and OTIME command
Page 1215 and 1216:
1207 MODEPOUT OFREQ and OTIME comma
Page 1217 and 1218:
1209 MODEPT Updates PACABS and PACA
Page 1219 and 1220:
1211 MODGM2 Create table entries fo
Page 1221 and 1222:
1213 MODGM4 Reads SPCs and SPCDs an
Page 1223 and 1224:
1215 MODTRK Reorders eigenvalues an
Page 1225 and 1226:
1217 MODTRL Modify trailer Examples
Page 1227 and 1228:
1219 MODUSET Modifies the degree-of
Page 1229 and 1230:
1221 MPP Prints monitor point resul
Page 1231 and 1232:
1223 MPYAD Matrix multiply and add
Page 1233 and 1234:
Page 1235 and 1236:
Page 1237 and 1238:
1229 MRGCOMP Merges two existing ae
Page 1239 and 1240:
1231 MSGHAN Passes message number f
Page 1241 and 1242:
1233 MTRXIN Converts DMIG entries t
Page 1243 and 1244:
Page 1245 and 1246:
Page 1247 and 1248:
1239 NASSETS Combines all element s
Page 1249 and 1250:
1241 NLCOMB Consolidates tables rel
Page 1251 and 1252:
1243 NLITER Computes nonlinear anal
Page 1253 and 1254:
Page 1255 and 1256:
Page 1257 and 1258:
1249 NLTRD Computes transient nonli
Page 1259 and 1260:
1251 NLTRD Computes transient nonli
Page 1261 and 1262:
1253 NLTRD2 Computes transient nonl
Page 1263 and 1264:
1255 NLTRD2 Computes transient nonl
Page 1265 and 1266:
1257 NORM Normalize a matrix NORM N
Page 1267 and 1268:
1259 NXNADAMS Creates an ADAMS MNF
Page 1269 and 1270:
1261 OFP Output file processor OFP
Page 1271 and 1272:
1263 OPTGP0 p-element analysis prep
Page 1273 and 1274:
1265 ORTHOG Generates orthonormal s
Page 1275 and 1276:
1267 OUTPRT Constructs sparse load
Page 1277 and 1278:
1269 OUTPUT2 Output a table or matr
Page 1279 and 1280:
Page 1281 and 1282:
Page 1283 and 1284:
Page 1285 and 1286:
Page 1287 and 1288:
Page 1289 and 1290:
1281 OUTPUT4 Output matrices onto a
Page 1291 and 1292:
Page 1293 and 1294:
Page 1295 and 1296:
1287 PARAML Sets parameters from a
Page 1297 and 1298:
Page 1299 and 1300:
Page 1301 and 1302:
Page 1303 and 1304:
Page 1305 and 1306:
Page 1307 and 1308:
1299 PARTN Matrix partition PARTN M
Page 1309 and 1310:
1301 PARTN Matrix partition 4. If {
Page 1311 and 1312:
1303 PARTN Matrix partition 1 2 3 5
Page 1313 and 1314:
1305 PCOPY Tests parallel copy PCOP
Page 1315 and 1316:
1307 PLOT Creates a table of plot i
Page 1317 and 1318:
1309 PLTSET Generates element sets
Page 1319 and 1320:
1311 PRESOL Prepares special tables
Page 1321 and 1322:
1313 PRTMSG Prints plotting informa
Page 1323 and 1324:
1315 PRTPARM Parameter and DMAP mes
Page 1325 and 1326:
1317 PVT Sets parameter values PVT
Page 1327 and 1328:
1319 RANDOM Computes functions from
Page 1329 and 1330:
1321 RANDOM Computes functions from
Page 1331 and 1332:
1323 RBMG3 Computes rigid body info
Page 1333 and 1334:
1325 READ Extracts real symmetric s
Page 1335 and 1336:
Page 1337 and 1338:
Page 1339 and 1340:
Page 1341 and 1342:
1333 RESTART Data block comparison
Page 1343 and 1344:
1335 RMAXMIN Searches result tables
Page 1345 and 1346:
1337 RMG2 Processes radiation excha
Page 1347 and 1348:
1339 RSPEC Converts transient respo
Page 1349 and 1350:
1341 SCALAR Matrix element extracto
Page 1351 and 1352:
1343 SDP Calculates nondimensional
Page 1353 and 1354:
1345 SDR1 Computes solution and sin
Page 1355 and 1356:
1347 SDR2 Creates output tables EDT
Page 1357 and 1358:
1349 SDR2 Creates output tables MET
Page 1359 and 1360:
1351 SDR3 Converts tables in SORT1
Page 1361 and 1362:
1353 SDRCOMP Calculates laminar str
Page 1363 and 1364:
1355 SDRHT Combines heat flow for C
Page 1365 and 1366:
1357 SDRNL Performs stress data rec
Page 1367 and 1368:
1359 SDRP Computes data for p-eleme
Page 1369 and 1370:
1361 SDRX Modifies CBAR, CBEAM and
Page 1371 and 1372:
1363 SDRXD Modifies CBAR, CBEAM and
Page 1373 and 1374:
1365 SDSA Partitions design model t
Page 1375 and 1376:
1367 SDSB Generates superelement pr
Page 1377 and 1378:
1369 SECONVRT Modifies Bulk Data en
Page 1379 and 1380:
1371 SEDR Partitions tables for sup
Page 1381 and 1382:
1373 SEDRDR Drives superelement dat
Page 1383 and 1384:
1375 SELA Assembles static load mat
Page 1385 and 1386:
1377 SEMA Assembles square symmetri
Page 1387 and 1388:
1379 SEP1 Constructs superelement m
Page 1389 and 1390:
1381 SEP1X Constructs superelement
Page 1391 and 1392:
1383 SEP1X Constructs superelement
Page 1393 and 1394:
1385 SEP2 Partitions tables for eac
Page 1395 and 1396:
1387 SEP2DR Drives superelement gen
Page 1397 and 1398:
1389 SEP2DR Drives superelement gen
Page 1399 and 1400:
1391 SEP2X Partitions tables for ea
Page 1401 and 1402:
1393 SEP3 Examines Case Control and
Page 1403 and 1404:
1395 SEP4 Examines table and data b
Page 1405 and 1406:
1397 SEPLOT Assembles plot displace
Page 1407 and 1408:
1399 SEPR1 Builds a list of partiti
Page 1409 and 1410:
1401 SEQP Resequencing processor Ou
Page 1411 and 1412:
1403 SEQP Resequencing processor NT
Page 1413 and 1414:
1405 SEQP Resequencing processor 8.
Page 1415 and 1416:
1407 SMA3 Assembles global stiffnes
Page 1417 and 1418:
1409 SMPYAD Matrix series multiply
Page 1419 and 1420:
1411 SOLVE Linear system solver Rem
Page 1421 and 1422:
1413 SOLVIT Iterative solver CASECC
Page 1423 and 1424:
1415 SOLVIT Iterative solver ADPTIN
Page 1425 and 1426:
1417 SOLVIT Iterative solver Format
Page 1427 and 1428:
1419 SSG1 Computes static load matr
Page 1429 and 1430:
1421 SSG2 Reduces static load and e
Page 1431 and 1432:
1423 SSG3 Computes static solutions
Page 1433 and 1434:
1425 SSG4 Updates static loads with
Page 1435 and 1436:
1427 STATICS Performs static analys
Page 1437 and 1438:
1429 STDCON Calculate stress discon
Page 1439 and 1440:
1431 STRSORT Filters and sorts elem
Page 1441 and 1442:
1433 TA1 Combines element data into
Page 1443 and 1444:
1435 TABEDIT Performs editing opera
Page 1445 and 1446:
Page 1447 and 1448:
Page 1449 and 1450:
1441 TABPRT Formatted table printer
Page 1451 and 1452:
Page 1453 and 1454:
Page 1455 and 1456:
Page 1457 and 1458:
Page 1459 and 1460:
1451 TABPT Table printer TABPT Tabl
Page 1461 and 1462:
1453 TAHT Adds records to element s
Page 1463 and 1464:
1455 TASNP1 Computes the shell norm
Page 1465 and 1466:
1457 TASNP2 Computes grid point she
Page 1467 and 1468:
1459 TIMETEST Provide timing data I
Page 1469 and 1470:
Page 1471 and 1472:
Page 1473 and 1474:
1465 TIMETEST Provide timing data C
Page 1475 and 1476:
1467 TOLAPP Appends nonlinear data
Page 1477 and 1478:
1469 TRD1 Solves for modal/direct,
Page 1479 and 1480:
1471 TRD2 Solves for modal/direct,
Page 1481 and 1482:
1473 TRLG Generates applied loads i
Page 1483 and 1484:
1475 TRNSP Matrix transpose TRNSP M
Page 1485 and 1486:
1477 TYPE Declares NDDL data blocks
Page 1487 and 1488:
1479 TYPE Declares NDDL data blocks
Page 1489 and 1490:
1481 UEIGL Solves both linear and q
Page 1491 and 1492:
1483 UGVADD Adds two displacement v
Page 1493 and 1494:
1485 UMERGE Merges two matrices bas
Page 1495 and 1496:
1487 UMERGE1 Merges two matrices ba
Page 1497 and 1498:
1489 UMERGE1 Merges two matrices ba
Page 1499 and 1500:
1491 UPARTN Partitions a matrix bas
Page 1501 and 1502:
1493 UPARTN Partitions a matrix bas
Page 1503 and 1504:
1495 UREDUC Reduces rectangular mat
Page 1505 and 1506:
1497 VDR Creates tables based on so
Page 1507 and 1508:
1499 VEC Creates partitioning vecto
Page 1509 and 1510:
1501 VECPLOT Transforms, searches,
Page 1511 and 1512:
Page 1513 and 1514:
Page 1515 and 1516:
1507 VIEW Computes heat transfer ra
Page 1517 and 1518:
1509 VIEWP Generates geometry table
Page 1519 and 1520:
XSORT Reads and sorts Bulk Data sec
Page 1521 and 1522:
XYPLOT Writes plot information to p
Page 1523 and 1524:
XYTRAN Creates table of plot instru
Page 1525 and 1526:
X Nastran MAP rogrammer’s uide I
show all

NX Nastran DMAP Programmer's Guide - Kxcad.net

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?