NX Nastran DMAP Programmer's Guide - Kxcad.net

650
Chapter 3
Name
Chapter 2
Name
Description
PG1 Combined static load matrix for the g-set and in the
residual structure. Output by PCOMB.
PGG Force matrix in g-set for all processors (global). Output
by DISUTIL.
PGT Static load matrix applied to the g-set appended for all
boundary conditions. Output by SDR1.
PGUP Static load matrix for the g-set and in the residual
structure due to static loads in upstream superelements
only.
PGVST Static load vector matrix (g-set). Output by MAKAEFS.
PHA Normal modes eigenvector matrix in the a-set. Output by
READ.
PHA1 Normal modes eigenvector matrix in the a-set updated
for mode tracking. Output by MODTRK.
PHAREF1 Designed normal modes eigenvector matrix in the a-set
updated for mode tracking. Output by MODTRK.
PHASH2 Structural partition (row-wise) of eigenvector matrix
PHDH. Also partitioned column-wise according to
parameter STRUCTMP.
PHDFH Fluid partition (row-wise) of eigenvector matrix PHDH.
PHDH Transformation matrix from d-set to h-set (modal).
Output by GKAM.
PHF Frequency response load matrix in the h-set (modal).
Output by FRLG.
PHF1 Frequency response load matrix in the h-set (modal)
combined with gust loads. Output by GUST.
PHG Normal modes eigenvector matrix in the g-set. Output
by READ and LANCZOS.
PHG* Family of normal modes eigenvector matrices in the
g-set.
PHG1 Normal modes eigenvector matrix in the g-set updated
for mode tracking. Output by MODTRK.