NX Nastran DMAP Programmer's Guide - Kxcad.net

336
OEF
Table of element forces
Word Name Type Description
1 FREQ RS Frequency
ACODE,4 =06 Transient
1 TIME RS Time step
ACODE,4 =07 Pre-buckling
1 LOADID I Load set identification number
ACODE,4 =08 Post-buckling
1 LOADID I Load set identification number
ACODE,4 =09 Complex Eigenvalues
1 MODE I Mode number
ACODE,4 =10 Nonlinear Statics
1 LOADSTEP RS Load step
ACODE,4 =11 Geometric Nonlinear Statics
1 LOADID I Load set identification number
End ACODE,4
End TCODE,1
THERMAL =1 Thermal data
NUMWDE =10 2-D and 3-D elements
2 NAME(2) CHAR4 Element type
4 XGRAD RS x gradient or '1'
5 YGRAD RS y gradient or '1'
6 ZGRAD RS z gradient or '1'
7 XFLUX RS x flux or '1'
8 YFLUX RS y flux or '1'
9 ZFLUX RS z flux or '1'
10 ZED I zero
NUMWDE =8 (CHBDY) thermal 107,108,109
2 NAME(2) CHAR4 Element name
4 FAPPLIED RS Applied load