NX Nastran DMAP Programmer's Guide - Kxcad.net

1451
TABPT
Table printer
TABPT Table printer
Prints table or matrix data blocks.
Format:
TABPT TAB1,TAB2,TAB3,TAB4,TAB5/ $
Input Data Blocks:
TABi Data block name.
Remarks:
1. Each input data block is treated as a table and its contents are printed on the
system output file via a prescribed format. Each word of the table is identified by
the module as to type (real, character, integer) and an appropriate format is used
(10 items per line).
2. The trailer data items for the table are also printed.
3. A warning message is issued if all TABi do not exist.
4. TABPT may be used to print matrices.
5. TABPT may occasionally misidentify real numbers or character values. The
TABPRT module with OPT3 ≠ 0 will properly identify real numbers and character
values.
6. The TABPRT module with OPT3 ≠ 0 will also print tables like TABPT with labels
above each item.
Examples:
TABPT GEOM1/ $
TABPT GEOM1,GEOM2,GEOM3,GEOM4/ $