NX Nastran DMAP Programmer's Guide - Kxcad.net

956
DSAF
Generates tables incorporating effect of retained first level responses
DSAF Generates tables incorporating effect of retained first level responses
Generates element summary and temperature tables that incorporate the effect of
retained first level responses.
Format:
DSAF R1TABR,EST,ESTDV2,TABEV2,ETT,MIDLIS,KELM,KDICT,
PTELEM,KELMDS,KDICTDS,PTELMDSX,ECT,VELEM,VELEMN/
ESTDCN,TABECN,ETTDCN,KELMDCN,KDICTDCN,PTELMDCN,
VELEMDCN/
NDVTOT/PESE $
Input Data Blocks:
R1TABR Table of retained first level (DRESP1 Bulk Data entry) attributes.
EST Element summary table.
ESTDV2 Merged element summary table with grid and element property design
variable perturbations.
TABEV2 Merged cross reference table of TABEVP and TABEVS.
ETT Element temperature table.
MIDLIS Table of pairs of user-supplied material property identification
numbers (MIDs) and internal baseline MIDs.
KELM Table of element matrices for stiffness, heat conduction, differential
stiffness, or follower stiffness.
KDICT KELM dictionary table.
PTELEM Table of thermal loads in the elemental coordinate system.
KELMDS Table of perturbed element stiffness matrices. If CDIF='YES' then this is
the forward perturbed element matrix dictionary.
KDICTDS Perturbed element stiffness matrix dictionary table. If CDIF='YES' then
this is the forward perturbed element matrix dictionary.
PTELMDSX Table of thermal loads in the elemental coordinate system for the
central, forward, or backward perturbed configuration.
ECT Element connectivity table.
VELEM Table of element lengths, areas, and volumes.
VELEMN Table of element lengths, areas, and volumes for the perturbed
configuration.