NX Nastran DMAP Programmer's Guide - Kxcad.net

SEPLOT
Assembles plot displacement matrices for superelements
PLTCNT Input/output-integer-no default. SEPLOT (or SEUPPLOT)
command counter.
Example:
On input:
0 Initialization
On output:
>0 Current SEPLOT (or SEUPPLOT) command
NGP Output-integer-no default. Number of grid points and scalar points
in the BGPDTX.
JPLOT Output-integer-no default. Number of element plot sets. Set to -1 if
there are none.
Excerpt from subDMAP SUPER3:
DBVIEW BGPDTF=BGPDTS WHERE (PEID=* AND MODLTYPE='STRUCTUR') $
DBVIEW ECTF=ECTS WHERE (PEID=* AND MODLTYPE='STRUCTUR') $
DO WHILE ( PLTCNT>-1 ) $
SEPLOT PCDB,EMAP,scstm,BGPDTF,ECTF,PUGF/
BGPDTX,PUGX,PLTXY,PLTPARY,GPSETSY,ELTSETSY/
'PEID'/'SEID'/S,N,PLTCNT/S,N,NSILS/S,N,JPLOT $
PRTMSG PLTXY//PDRMSG $
IF ( JPLOT>=0 ) THEN $
PLOT PLTPARY,GPSETSY,ELTSETSY,CASECC,BGPDTX,
PUGX,PUGX,gpect,oes1x/
PLOTY2/NSILS/0/JPLOT/-1/S,N,PFILE $
PRTMSG PLOTY2//PDRMSG $
ENDIF $ JPLOT>=0
ENDDO $ PLTCNT>-1
139