NX Nastran DMAP Programmer's Guide - Kxcad.net

Word Name Type Description
25 P3Z RS Third principal z cosine
Words 5 through 25 repeat 005 times
TCODE,7 =1 Real / Imaginary
2 CID I Stress Coordinate System
OES
Table of element stresses or strains
3 CTYPE CHAR4 Coordinate System Type (BCD)
4 NODEF I Number of Active Points
5 GRID I External grid identification number
(0=center)
6 SXR RS Normal in x
7 SYR RS Normal in y
8 SZR RS Normal in z
9 TXYR RS Shear in xy
10 TYZR RS Shear in yz
11 TZXR RS Shear in zx
12 SXI RS Normal in x
13 SYI RS Normal in y
14 SZI RS Normal in z
15 TXYI RS Shear in xy
16 TYZI RS Shear in yz
17 TZXI RS Shear in zx
Words 5 through 17 repeat 005 times
End TCODE,7
End SCODE,6
ELTYPE =40 Rod type spring and damper (CBUSH1D)
TCODE,7 =0 Real
2 FE RS Element Force
3 UE RS Axial Displacement
4 VE RS Axial Velocity*
415