NX Nastran DMAP Programmer's Guide - Kxcad.net

210
GEOM168
Table of Bulk Data entry images related to geometry
Record 13 – POINT(6001,60,377)
Word Name Type Description
1 ID I Point identification number
2 CID I Coordinate system identification number
3 X1 RS Location of the point in coordinate 1 of CID
4 X2 RS Location of the point in coordinate 2 of CID
5 X3 RS Location of the point in coordinate 3 of CID
Record 14 – GMSURF(10101,101,394)
Word Name Type Description
1 ID I Surface Identification number
2 GROUP(2) CHAR4 Group of curves/surfaces to which this
curve belongs
4 CIDIN I Coordinate system identification number
for the geometry
5 CIDBC I Coordinate system identification number
for the constraints
6 DATA CHAR4 Geometry evaluator specific data
Word 6 repeats until End of Record
Record 15 – GMCORD(6401,64,402)
Word Name Type Description
1 CID I Coordinate system identification number
2 ENTITY CHAR4 Bulk Data entry used to define the
coordinate system
3 ID1 I Entity identification number 1
4 ID2 I Entity identification number 2