NX Nastran DMAP Programmer's Guide - Kxcad.net

1437
TABEDIT
Performs editing operations on table data blocks
2. The CR directive requires at least one subdirective from the table below:
CR Subdirectives
Sub-Directive Remarks
QW, i Quit after copying Word i. Record specified by CR
directive is copied through word i and the rest of the
record is ignored.
DW, i, j, n,
n words
IW, i, n,
n words
KWA,n
KWB,n
KWC,n
SWA,n
SWB,n
SWC,n
AWA,n
AWB,n
AWC,n
KRA,n
KRB,n
KRC,n
ARA
ARB
ARC
Delete Words i through j of the record specified by the
CR directive and replace by the n words that follows
on the CR directive record.
Insert after Word i of the record specified by the CR
directive the n words that follow on the CR directive
record.
Kopy n Words from TA, TB, or TC onto TNEW.
skip n words forward on TA, TB, or TC. Used to
position secondary data block TA, TB or TC for a
subsequent KW* operation.
Append n Words from TA, TB, or TC onto TNEW after
copying the rest of the record specified by the CR
directive.
Kopy the Remaining contents of the current record
from TA, TB, or TC onto TNEW.
Append the Remaining contents of the current record
from TA, TB, or TC onto TNEW after copying the rest
of the record specified by the CR directive.
3. TABEDIT copies the name of the input data block to the output data block. Since
the name is part of record 0, it can also be changed by TABEDIT commands.