NX Nastran DMAP Programmer's Guide - Kxcad.net

Parameters:
Remarks:
1. MPT, ESTL, and ESTNL may be purged if NOSUP=1.
TA1
Combines element data into tables
LUSET Input-integer-no default. The number of degrees-of-freedom in the
g-set.
NOESTL Output-integer-no default. ESTL generation output flag. Set to 1 if ESTL
is generated; -1 otherwise.
NOSIMP Output-integer-no default. The number of elements exclusive of
general elements. Set to -1 if there are no simple elements.
NOSUP Input-integer-no default. Element summary table request flag.
2. ECTA and EHT may be purged if p-elements or interface elements are not
present.
3. GEI, ESTL, ESTNL, and DITID may be purged as long as EST is purged.
4. VGFD may be purged.
1 Generate EST only (usually for linear analysis)
2 Form EST, ESTNL and ESTL (usually for nonlinear analysis)
NOGENL Output-integer-no default. The number of general elements.
Set to -1 if there are no general elements.
SEID Input-integer-no default. Superelement identification number.
LGDISP Input-integer-default=1. Large displacement and follower force flag.
-1 No large displacement and follower force effects will be considered.
1 Large displacement and follower force effects will be considered.
2 Only large displacement effects will be considered.
NLAYERS Input-integer-default=6. Number of layers to integrate through the
thickness of CQUAD4 and CTRIA3 elements in nonlinear analysis.
FREQDEP Output-logical-default=FALSE. Frequency-dependent element flag. Set
to TRUE if frequency-dependent elements are present.
5. DITID may be purged as long as DIT is purged.
143