NX Nastran DMAP Programmer's Guide - Kxcad.net

354
OEF
Table of element forces
Word Name Type Description
TCODE,7 =1 Real/imaginary or magnitude/phase
2 FR(9) RS User defined - real/mag.
11 FI(9) RS User defined - mag./phase
End TCODE,7
ELTYPE =59 Seven-point dummy element (CDUM7)
TCODE,7 =0 Real
2 F(9) RS User defined
TCODE,7 =1 Real/imaginary or magnitude/phase
2 FR(9) RS User defined - real/mag.
11 FI(9) RS User defined - mag./phase
End TCODE,7
ELTYPE =60 Two-dimensional crack tip element (CRAC2D or
CDUM8)
TCODE,7 =0 Real
2 F(9) RS User defined
TCODE,7 =1 Real/imaginary or magnitude/phase
2 FR(9) RS User defined - real/mag.
11 FI(9) RS User defined - mag./phase
End TCODE,7
ELTYPE =61 Three-dimensional crack tip element (CRAC3D or
CDUM9)
TCODE,7 =0 Real
2 F(9) RS User defined
TCODE,7 =1 Real/imaginary or magnitude/phase
2 FR(9) RS User defined - real/mag.
11 FI(9) RS User defined - mag./phase
End TCODE,7
ELTYPE =62 Unused (Pre-V69 CQDMEM1)
2 UNDEF none