NX Nastran DMAP Programmer's Guide - Kxcad.net

724
Name Type and Description
'FORE' Forward (analysis)
'BACK' Backward (data recovery)
PBCONT Integer. Slideline contact flag.
PDEPDO Integer. Skip factor flag. See NOi on TSTEP Bulk Data entry. Output
by TRLG.
0 Skip factor is >1.
-1 Skip factor is 1.
PEID Integer. Primary superelement identification number. Output by
SEP2DR and SEDRDR.
PENFAC Real. Penalty factor for electromagnetic elements.
PEXIST Logical. Set to TRUE if p-elements are present.
Pi Character. Generic name of the data block DBi to be processed by the
DBC module. Integer. Inputs to the MATGEN, MATMOD, and
PARAML module. Any type. Inputs to MESSAGE module.
PLSIZE Integer. Size of the load matrix. Compared to the size of load matrix
in the previous subcase in order to detect boundary condition
changes in the current subcase. Boundary condition changes are not
allowed in the arc-length method. Output by NLITER.
PLTCNT Integer. SEPLOT (or SEUPPLOT) command counter. Output by
SEPLOT.
On input:
0 Initialization
On output:
>0 Current SEPLOT (or SEUPPLOT) command
PLTNUM Output. Plot frame counter. Output by PLOT, MSGSTRES, and
XYTRAN.
PNLPTV Logical. Panel participation/partition vector flag. If TRUE, then
generate a partitioning vector APART which may be used to partition
the g-set size coupling matrix to obtain the panel's coupling matrix.
PNQALNAM Character. Name of qualifier for panels.
POSTU Integer. Fortran unit number to which the DBC module writes data
recovery information.