NX Nastran DMAP Programmer's Guide - Kxcad.net

Chapter 3
Name
Chapter 2
Name
Description
OBJTAB OBJTAB Design objective table for a given analysis type and
superelement. Objective attributes with retained
response identification number. Output by DOPR3.
OBJTBG OBJTAB Design objective table. Objective attributes with retained
response identification number.
OBJTBR OBJTAB Table of design objective attributes with retained
response identification number. Output by DSAD.
OCCORF Output table of cross-correlation functions. Output by
RANDOM.
OCEIG Complex eigenvalue extraction report. Output by CEAD.
OCPSDF Output table of cross-power-spectral-density functions.
Output by RANDOM.
OEDE1 Elemental energy loss. Output by GPFDR.
OEDS1 OES Table of element stress discontinuities. Output by
STDCON.
OEEATO2 OEE Table of element strains in SORT2 format for the
autocorrelation function. Output by RANDOM.
OEECRM2 Table of element strains in SORT2 format for the cross
correlation function. Output by RANDOM.
OEENO2 OEE Table of element strains in SORT2 format for the NO
function. Output by RANDOM.
OEEPSD2 OEE Table of element strains in SORT2 format for the PSD
function. Output by RANDOM.
OEERMS2 OEE Table of element strains in SORT2 format for the RMS
function. Output by RANDOM.
OEF OEF Table of element forces in SORT1 or SORT2 format.
Output by DDRMM.
OEF1 OEF Table of element forces (or fluxes) in SORT1 format.
Output by SDR2 or DRMH3.
OEF1A OEF Table of element forces in SORT1 format for the
composite elements only. Output by SDR2.
639