NX Nastran DMAP Programmer's Guide - Kxcad.net

Name Type and Description
NOGOIFPi Logical. IFPi module error return flag. Set to TRUE if an error was
detected. Output by IFPi.
NOGOMEPT Logical. MODEPT module error return flag. Set to TRUE if an error
was detected. Output by MODEPT.
NOGOMGM2 Logical. MODGM2 module error return flag. Set to TRUE if an error
is found. Output by MODGM2.
NOGONL Integer. Nonlinear "no-go" flag. Set to +1 to continue or -1 to
terminate. Output by NLTRD2.
NOGOXSRT Logical. XSORT module error return flag. Set to TRUE if an error was
detected. Output by XSORT.
NOGPDCT Integer. GPDCT generation flag. Set to 0 if GPDCT is generated.
Output by STDCON.
NOGRAV Integer. Gravity load existence flag. Set to -1 if no GRAV Bulk Data
entry images, +1 otherwise. Output by GP3.
NOGUST Integer. Gust load flag. Set to -1 if no gust loads exist; otherwise set
to 1. Output by GUST.
NOINT Integer. Number of integer value inputs for PRGNAME.
NOK2 Integer. K2GG or K2PP generation flag. Set to +1 if K2GG or K2PP is
generated; -1 otherwise. Output by MTRXIN.
NOK4GG Integer. Differential stiffness or structural damping generation flag.
Output by EMG.
On input:
>3 Compute geometric nonlinear effects