NX Nastran DMAP Programmer's Guide - Kxcad.net

TlMTS8 Element generation and assembly timing.
Output Data Blocks:
TOUT,
TOUTi
Timing results.
N Options 1 and 2: n* - Default = 50. External loop index.
Options 3, 4, and 5: Scale Factor.
Negative value means scale down.
Value 0 or 1 means do not change.
Positive value means scale up.
Options 6 and 8: Not used.
TIMETEST
Provide timing data
M Options 1 and 2: m* - Default = 200. Internal loop index.
Options 3, 4, and 7: Size - Contains the size of various needed arrays.
(recommended value range: 128 to 1024).
(e.g., Workstation machines: 128.
Low-End Minicomputer (VAX): 256.
High-End Minicomputer (CONVEX): 512.
Super Computer (CRAY): 1024).
Options 5, 6, and 8: Not used.
T Options 1 and 2: Default = 2. Data item type (1 = RSP, 2 = RDP, 3 =
CSP, 4 = CDP).
Options 3-8: Not used.
OPT All Options: Type of timing data required.
1 Input/Output Operations (Default) (old).
2 Arithmetic Operations (old).
3 Matrix Timing Operations (new).
4 Kernel Timing Operations (new).
5 MPYAD Timing Operations CASE = 1 (new) (uses data in DTI
file).
MPYAD Timing Operations CASE = 2 (new) (uses data defined
by remaining arguments).
6 KERNDB Data Block Generation (new).
7 Sparse Kernel Timing (new).
8 Element Timing (new).
146