NX Nastran DMAP Programmer's Guide - Kxcad.net

DRDUG Matrix of adjoint loads for the g-set
DRDUTB Table of adjoint load attributes
Parameters:
DSAD
Processes tables related to design sensitivity response evaluation
CASADJ Case Control table associated with adjoint method
LCDVEC Partitioning vector for load case deletion. The row size is the same
number of columns in UGX and ones for columns which are retained in
UGX1. LCDVEC is intended for partitioning of analysis results related
to inertia relief and SPCforces.
RR2IDR Table of retained referenced type two response identification list
R3VAL Matrix of initial values of the retained third level responses.
R3VALR Matrix of initial values of the retained third level responses.
RESP3R Table of retained third level responses in RESP3.
RMSTABR Table of retained RMS responses in RMSTAB.
RMSVALR Matrix of initial values of the retained RMS responses in RMSVAL.
WGTS Input-real-default=0.0. Total weight of analysis model.
VOLS Input-real-default=0.0. Total volume of analysis model.
OBJVAL Output-real-default=0.0. Objective value.
NR1OFFST Input/output-integer-default=0. Counter for retained type 1
responses. The value is initialized to 1 and is incremented by the
number of records in R1TABR.
NR2OFFST Input/output-integer-default=0. Counter for retained type 2
responses. The value is initialized to 1 and is incremented by the
number of records in RSP12R.
NCNOFFST Input/output-integer-default=0. Counter for retained constraints. The
value is initialized to 1 in and is incremented by the number of
records in CNTABR.
APP Input-character-default=' '. Analysis type. Allowable values are:
'STATICS':statics
'FREQRESP':frequency response
'TRANRESP':transient respsonse
DMRESD Input-integer-default=-1. Design model flag. If set to -1, then the
design model is limited to the residual structure.
SEID Input-integer-default=0. Superelement identification number.
949