NX Nastran DMAP Programmer's Guide - Kxcad.net

SIL Scalar index list.
EPT Element property table.
MAKEOLD
Converts tables from Version 69 (or greater) to pre-Version 69 format
2. The inputs, outputs, and parameters can be specified in any order as long as the
parameters are in the same positions as their respective inputs or outputs. For
example, the following specifications are equivalent.
MAKEOLD GEOM1,AXIC,,,/OGEOM1,OAXIC,,,/
'GEOM1'/'AXIC'///'GEOM1'/'AXIC' $
MAKEOLD AXIC,GEOM1,,,/OAXIC,OGEOM1,,,/
'AXIC'/'GEOM1'///'AXIC'/'GEOM1' $
3. If BGPDT is specified as input then MAKEOLD creates four tables BGPDT,
EQEXIN, SIL, and GPL. For example,
MAKEOLD BGPDT,,,,/OBGPDT,OEQEXIN,OSIL,OGPL,/
'BGPDT'/////'BGPDT'/'EQEXIN'/'SIL'/'GPL' $
4. Heat transfer and p-elements in EST cannot be processed by MAKEOLD.
112