NX Nastran DMAP Programmer's Guide - Kxcad.net

606
Chapter 3
Name
Chapter 2
Name
Description
DIVDAT Table of divergence data. Output by DIVERG.
DIVTAB Table of aerostatic divergence data for all subcases.
DJX Downwash matrix. Downwash at the j-point due to the x
aerodynamic extra point. Output by ADG.
DLCPHL Left-handed complex eigenvectors associated with the
divergence eigenvalues extracted from the real part of
left-handed eigenvectors associated with the divergence
eigenvalues. Output by DIVERG.
DLSTIN List of data blocks and their paths. Output in a previous
execution of RESTART.
DLSTOUT List of data blocks and their paths. Output by RESTART.
DLT Table of dynamic loads. Output by DPD.
DLT1 Table of dynamic loads updated for nonlinear analysis.
Output by NLCOMB.
DLTH Table of dynamic loads updated for heat transfer
analysis. Output by TRLG.
DM Rigid body transformation matrix for the r-set to the
l-set. Output by RBMG3.
DMATCK Table of designed material consistency check. Output by
DOPR1.
DMI Table of all matrices specified on DMI Bulk Data entries.
Output by IFP.
DMIi Matrix data blocks created from DMI. Output by DMIIN.
DMINDX Index into DMI. Output by IFP.
DNODEL Table of designed and non-designed locations. Output
by DOPR2.
DPHG Normal modes eigenvector matrix in the g-set associated
with designed (active) eigenvalues. Output by DSAH.
DPLDXI Matrix of coefficients in the property to independent
design variable relationship. Output by DOPR1.