NX Nastran DMAP Programmer's Guide - Kxcad.net

982
DSMA
Generates combined design sensitivity/constraint matrix
DSMA Generates combined design sensitivity/constraint matrix
Generates the combined design sensitivity/constraint matrix. Applicable to Old
Design Sensitivity Analysis only.
Format:
DSMA DSPT2,OUG1DS,OES1DS,OEF1DS,OES1CDS,OEFITDS/
DSCMR,UNUSED2/
APP $
Format for statics:
Format for normal modes:
DSMA DSPT2,DSEGM,,,,/
DSCMR,/
APP $
Input Data Blocks:
DSPT2 Old design sensitivity processor table two
DSEGM Old design sensitivity eigenvalue gradient matrix
OUG1DS Table of displacements in SORT1 format for design responses.
OES1DS Table of element stresses in SORT1 format for design responses.
OEF1DS Table of element forces in SORT1 format for design responses.
OES1CDS Table of composite element stresses in SORT1 format for design
responses.
OEFITDS Table of composite element failure indices for design responses.
UNUSED2 Unused and may be purged.
Output Data Blocks:
DSCMR Old combined design sensitivity/constraint matrix.
Parameters:
APP Input-character-default='STATICS'. Analysis type.
Allowable values are:
'STATICS'Statics
'BUCKL'Buckling
'MODES'Normal modes