NX Nastran DMAP Programmer's Guide - Kxcad.net

688
Name Type and Description
CMPXD Complex double precision. Complex double precision value in the
next record.
CMPXi Complex. Complex value for PRGNAME.
CNCNT Integer. Counter for constraints in CONTAB. Output by DOPR3.
CNVFLG Integer. Design optimization convergence flag. Output by DOM12.
0 No convergence is achieved
1 Soft convergence is achieved
2 Hard convergence is achieved
COLINC Integer. Column increment. Extract every COLINC'th column
between STARTCOL and ENDCOL.
COLNAM Character. Degree-of-freedom set name for labeling matrix rows
MATGPR output.
COLNUM Integer. Selects the column number of the input matrix that will be
sorted to produce SORTLIST and SORTBOOL. Default selects the
first column.
COMPRPLC Logical. If TRUE then components with duplicate names will be
copied from COMP1 into COMP.
CONFAC Integer. Image superelement congruence tolerance for the location of
boundary grid points and displacement coordinate systems.
CONSEC Integer. A composite number equal to 10*(value of NSTEP the last
time MAXBIS was reached) + (the number of consecutive time steps
which have reached MAXBIS). If CONSEC=5, then solution process
is terminated. Output by NLTRD and NLTRD2.
CONV Integer. Nonlinear analysis convergence flag. Output by NLITER,
NLTRD, and NLTRD2.
On input:
0 Initialization
On output:
-1 Convergence has not been achieved
1 Convergence has been achieved.
COORID Integer. Coordinate system identification number.
COUPMASS Integer. Coupled mass generation flag.