NX Nastran DMAP Programmer's Guide - Kxcad.net

512
OES
Table of element stresses or strains
Word Name Type Description
11 TMAX1 RS von Mises or Maximum shear
End SCODE,6
End ELTYPE
Record 3 - TRAILER
Word Name Type Description
1 UNDEF(6 ) none
Notes:
1. For CBEAM (2) Item codes are given for end A. Addition of the quantity (K-1) 10
to the item code points to the same information for other stations, where K is the
station number. K=11 for end B and 2-10 for intermediate stations.
2. For CTRIA6 (53) The stresses are repeated for each of the stress points within
each element. For CHEX8 there are 9 stress points for each element. For CHEX20
there are 9 plus (the number of nondeleted mid-side nodes) stress points for each
element.
3. For QUAD8 (64) For corner grids, real , add 17I to items 3 through 19, where I =
1,2,3,4 (87 total words). For corner grids, real/imaginary add 15I to items 3
through 19, where I = 1,2,3,4 (77 total words).