NX Nastran DMAP Programmer's Guide - Kxcad.net

1349
SDR2
Creates output tables
METRIK Input-integer-default=-1. Parameter for electromagnetic analysis.
ISOFLG Input-integer-default=-1. Parameter for electromagnetic analysis.
GPF Input-integer-default=-1. Parameter for electromagnetic analysis.
ACOUT Input-character-default='PEAK'. Type of acoustic pressure output in
fluid-structural analysis.
'RMS' Root-mean-square
'PEAK' Peak
PREFDB Input-real-default=1.0. Peak pressure reference for pressure level in
units of dB or dBA.
TABS Input-real-default=0.0. Absolute temperature conversion. For example,
set to 273.16 when specifying temperatures in Celsius or 459.69 in
Fahrenheit.
SIGMA Input-real-default=0.0. The Stefan-Boltzmann constant. Used to
compute radiant heat flux.
ADPTINDX Input-integer-default=-1. P-version analysis adaptivity index.
ADPTEXIT Output-logical-default=FALSE. Set to TRUE if this is the final
BSKIP Input-logical-default=TRUE. Pre-buckling subcase skip flag. If TRUE,
then skip the first subcase in CASECC.
FREQWA Input-real-default=0.0. Parameter for electromagnetic analysis.
BTBRS Input-real-default=0.0. Parameter for electromagnetic analysis.
LANGLE Input-integer-default=1. Large rotation calculation method:
1 Gimbal angle
2 Rotation vector
OMID Input-character-default='NO' Material output coordinate system flag.
If OMID='YES' then stresses, strains, and forces are output in the
material coordinate system of CQUAD4, CTRIA3, CQUAD8, and
CTRIA6 elements.
Remarks:
1. Any output may be purged.
2. CSTM may be purged if no coordinate systems are referenced, or if stresses
and/or forces are not requested.