NX Nastran DMAP Programmer's Guide - Kxcad.net

Word Name Type Description
TCODE,7 =1 Real / Imaginary
2 UNDEF none
End TCODE,7
SCODE,6 =01 Stress
TCODE,7 =0 Real
2 HOPA RS Harmonic or point angle
3 FD1 RS Z1=Fibre Distance
4 SU1 RS Normal in u at z1
5 SV1 RS Normal in v at z1
6 ST1 RS Shear in uv at z1
7 A1 RS Theta (Shear Angle) at z1
8 SMJRP1 RS Major Principal at z1
9 SMNRP1 RS Minor Principal at z1
10 STMAX1 RS Maximum Shear at z1
11 FD2 RS Z2=Fibre Distance
12 SU2 RS Normal in u at z2
13 SV2 RS Normal in v at z2
14 ST2 RS Shear in uv at z2
15 A2 RS Theta (Shear Angle) at z2
16 SMJRP2 RS Major Principal at z2
17 SMNRP2 RS Minor Principal at z2
18 STMAX2 RS Maximum Shear at z2
TCODE,7 =1 Real / Imaginary
2 UNDEF none
End TCODE,7
End SCODE,6
ELTYPE =36 Unused (Pre-V69 CTRIARG)
2 UNDEF none
OES
Table of element stresses or strains
411