NX Nastran DMAP Programmer's Guide - Kxcad.net

614
Chapter 3
Name
Chapter 2
Name
Description
ERROR1 ERROR Error-estimate table updated for current superelement or
adaptivity loop. Output by ADAPT.
EST Element summary table. Output by TA1.
ESTDATA Table of superelement estimation data overrides. Output
by DTIIN.
ESTL Linear element summary table. Output by TA1.
ESTDCN Element summary table which incorporates combined
constraints and design variables. Output by DSAF and
DSTA.
ESTDV2 Merged EST with grid and element property design
variable perturbations. If CDIF='YES' then this is the
forward perturbation. Output by DSAE.
ESTDVB Element summary table for the backward perturbed
configuration. Required only if CDIF='YES'.
ESTDVM EST EST with updated material property identification
numbers. Output by DSABO.
ESTDVP EST with element property design variable
perturbations. Output by DSABO and DSTA.
ESTDVS EST with grid design variable perturbations. Output by
DOPR6.
ESTF Element summary table for follower force stiffness.
Output by TAFF.
ESTNL Nonlinear element summary table. Output by TA1.
ESTNL1 Nonlinear element summary table updated for heat
transfer analysis. Output by TAHT.
ESTNLH Nonlinear element summary table at converged step.
Output by NLITER, NLTRD, and NLTRD2.
ESTR EST table with reduced records. Output by MATMOD
option 38.
ETT Element temperature table. Output by GP3.