NX Nastran DMAP Programmer's Guide - Kxcad.net

• 4 = punch
and their sums; e.g., 3 indicates print and plot.
2. Possible values for SORT1 output format (___FMT) are:
• 1 = real
• 2 = real/imaginary
• 3 = magnitude/phase
For SORT2, the same values are negative.
3. Possible values for SYMFLG are:
• 0 = no symmetry
• -1 = REPCASE and
• N = number of SYMSEQ or SUBSEQ coefficients
4. Possible values for DSAPRT are:
• 1 = Print (default)
• 0 = No print
5. Possible values for DSASTORE are:
• 1 = Store on data base and
• 0 = Don't store on data base (default)
6. Possible values for DSAOUTPT are:
• 1 = Store via OUTPUT2 and
• 0 = Don't store via OUTPUT2 (default)
7. Possible values for AXSYMSET are:
• 1 = Sine
• 2 = Cosine or fluid
CASECC
Case Control information
8. Possible values for the SECMDFLG are:
• 0 = at least one of SEMG, SEKR, SEMR, SELG, SELR or SEALL is
specified
• -1 = none are specified
9. DSAFINAL=-1 means the last iteration.
10. DSASETID=-1 means the all design sensitivities.
95