NX Nastran DMAP Programmer's Guide - Kxcad.net

1092
IFP8
Creates MATHP Bulk Data entry records
IFP8 Creates MATHP Bulk Data entry records
Create MATHP Bulk Data entry records based upon data on the TABLES1 Bulk Data
entry records for use in hyperelastic analysis.
Format:
IFP8 MPT,DIT/MPTX/S,N,NOGOIFP8 $
Input Data Blocks:
MPT Table of Bulk Data entry images related to material properties.
DIT Table of TABLEij Bulk Data entry images.
Output Data Blocks:
MPTX Copy of MPT except applicable MATHP records are updated to include
referenced TABLSE1 Bulk Data entry information
Parameter:
NOGOIFP8 Logical-output-default=FALSE. Set TRUE if an error is detected in the
Bulk Data entries.
Remarks:
1. IFP8 does not terminate the run if an error is detected in the Bulk Data entries.
NOGOIFP8 should be checked before proceeding to the GP1 module
2. IFP8 must appear after the IFP4 and before the IFP9 modules.
3. IFP8 modifies the MATHP Bulk Data entry records using least squares fitting of
experimental data referenced on TABLES1 Bulk Data entry records to analytically
obtained solutions.
Example:
See the example in the “IFP” on page 1077 module description.