NX Nastran DMAP Programmer's Guide - Kxcad.net

310
MPT
Table of Bulk Data entry images related to material properties
Word Name Type Description
11 TREF RS Reference temperature for the calculation of
thermal loads
12 XT RS Allowable longitudinal stress or strain in
tension
13 XC RS Allowable longitudinal stress or strain in
compression
14 YT RS Allowable lateral stress or strain in tension
15 YC RS Allowable lateral stress or strain in
compression
16 S RS Allowable stress or strain for in-plane shear
17 GE RS Structural damping coefficient
18 F12 RS Interaction term in the tensor polynomial
theory of Tsai-Wu
19 STRN RS For the maximum strain theory only
Record 8 – MAT9(2603,26,300)
Word Name Type Description
1 MID I Material identification number
2 G(21) RS Material property matrix
23 RHO RS Mass density
24 A(6) RS Thermal expansion coefficients
30 TREF RS Reference temperature for the calculation
of thermal loads
31 GE RS Structural damping coefficient
32 UNDEF(4 ) none
Record 9 – MAT10(2801,28,365)
Word Name Type Description
1 MID I Material identification number
2 BULK RS Bulk modulus