NX Nastran DMAP Programmer's Guide - Kxcad.net

906
DOM10
Prints initial and final results for design optimization
DRSTBLG Table containing the number of retained responses for each subcase for
each of the response types.
TOL1 Transient response time output list truncated by the OTIME Case
Control command.
FOL1 Frequency response frequency output list truncated by the OFREQ
Case Control command.
FRQRPRG Table containing the number of first level retained responses per
response type and per frequency or time step.
DBMLIB Table of designed beam library data
BCON0 Table of constant terms in the beam section constraint relationship
BCONXI Matrix relating beam library constraints to the independent design
variables.
WMID Table of weight as a function of material identification number.
RSP3RG Table of attributes of the retained third level responses
R3VALRG Matrix of initial values of the retained third level responses
R3VALO Matrix of final values of the third level responses
Output Data Blocks:
None.
Parameters:
DESCYCLE Input-integer-default=0. Design cycle analysis counter or flag.
-1 initial execution of DOM10
-2 final execution of DOM10
>0 design cycle number
DESMAX Input-integer-default=0. Maximum allowed design optimization
iteration number.
OBJIN Input-real-default=0.0. Initial objective value.
OBJOUT Input-real-default=0.0. Final objective value.
EIGNFREQ Input-integer-default=0. Eigenvalue/frequency response type flag.
1 eigenvalue (radian/time)
2 frequency (cycle/time)