NX Nastran DMAP Programmer's Guide - Kxcad.net

360
OEF
Table of element forces
Word Name Type Description
3 MY RS Membrane in y
4 MXY RS Membrane in xy
5 BMX RS Bending in x
6 BMY RS Bending in y
7 BMXY RS Bending in xy
8 TX RS Transverse Shear in x
9 TY RS Transverse Shear in y
TCODE,7 =1 Real/imaginary or magnitude/phase
2 MXR RS Membrane in x - real/mag. part
3 MYR RS Membrane in y - real/mag. part
4 MXYR RS Membrane in xy - real/mag. part
5 BMXR RS Bending in x - real/mag. part
6 BMYR RS Bending in y - real/mag. part
7 BMXYR RS Bending in xy - real/mag. part
8 TXR RS Transverse Shear in x - real/mag. part
9 TYR RS Transverse Shear in y - real/mag. part
10 MXI RS Membrane in x - imag./phase part
11 MYI RS Membrane in y - imag./phase part
12 MXYI RS Membrane in xy - imag./phase part
13 BMXI RS Bending in x - imag./phase part
14 BMYI RS Bending in y - imag./phase part
15 BMXYI RS Bending in xy - imag./phase part
16 TXI RS Transverse Shear in x - imag./phase part
17 TYI RS Transverse Shear in y - imag./phase part
End TCODE,7
ELTYPE =75 Curved triangular shell element (CTRIA6)
2 TERM CHAR4 Character string "CEN/"
3 GRID I Number of active grids or corner grid ID