NX Nastran DMAP Programmer's Guide - Kxcad.net

1373
SEDRDR
Drives superelement data recovery loop
SETYPE Output-character-default=' '. Superelement type as specified on
the SEBULK Bulk Data entry.
Remark:
SEDRDR processes each superelement, specified in DRLIST, in the order of data
recovery; i.e., downstream to upstream or residual structure to tip superelements.
Example:
'REPEAT' Repeated
'MIRROR' Mirror
'COLLTR' Collector
'EXTRNA' External
'PRIMARY' Primary
RSEID Output-integer-default=0. Repeated superelement identification
number as specified on the SEBULK Bulk Data entry.
SCNDRY Output-integer-default=0. Secondary (identical or mirror)
superelement flag. Set to -1 if superelement is defined by the CSUPER
Bulk Data entry with PEID>0.
EXTRN Output-integer-default=0. External superelement flag. Set to -1 if
superelement is defined by the CSUPER Bulk Data entry with
PEID=0.
SEDRCNTL Input-character-default=' '. Processing list selection.
' ' All superelements will be processed (default).
'CURR' Only the superelement specified by SEID parameter will
be processed.
NOPGHD Input-integer-default=0. Page header superelement label print
control.
0 Print page header and UIM 7321.
-1 Do not print page header and UIM 7321.
-2 Same as -1 and do not print .f04 label.
-3 Same as -2 and do not print superelement label in
SUBTITLE line of page header.
Compose a DMAP loop to process all superelements starting at the residual structure
and ending with the tips.