NX Nastran DMAP Programmer's Guide - Kxcad.net

434
OES
Table of element stresses or strains
Word Name Type Description
3 CTYPE CHAR4 Coordinate System Type (BCD)
4 NODEF I Number of Active Points
5 GRID I External grid identification number
(0=center)
6 SXR RS Normal in x
7 SYR RS Normal in y
8 SZR RS Normal in z
9 TXYR RS Shear in xy
10 TYZR RS Shear in yz
11 TZXR RS Shear in zx
12 SXI RS Normal in x
13 SYI RS Normal in y
14 SZI RS Normal in z
15 TXYI RS Shear in xy
16 TYZI RS Shear in yz
17 TZXI RS Shear in zx
Words 5 through 17 repeat 007 times
End TCODE,7
End SCODE,6
ELTYPE =69 Curved beam or pipe element (CBEND)
SCODE,6 =0 Strain
TCODE,7 =0 Real
2 GRID I External Grid Point identification
number
3 CA RS Circumferential Angle
4 EC RS Long. strain at Point C
5 ED RS Long. strain at Point D
6 EE RS Long. strain at Point E
7 EF RS Long. strain at Point F