NX Nastran DMAP Programmer's Guide - Kxcad.net

GEOM4
Table of Bulk Data entry images related to constraints
Word Name Type Description
27 CIDE I Coordinate system identification number
for the edge
28 MAXNDFE I Maximum number of degrees-of-freedom,
or stride, for the edge
29 MAXNDFB I Maximum number of degrees-of-freedom,
or stride, for the body
30 PUSER I p-level specified by user
31 PSEL I p-level selected by program
32 BODYFID I Grid-n identification number for the body
33 NDOFB I Number of degrees-of-freedom for the body
34 F1ID I Grid-n 1 identification number
35 CID I Coordinate system identification number
36 X RS S,{
37 Y RS S,{
38 Z RS S,{
Words 34 through 38 repeat 7 times
Record 13 – FCENDT(9001,90,9024)
Word Name Type Description
1 LOADID I Load set identification number
2 SID I Set identification number
3 FACEID I Face identification number
4 C I Component numbers
5 DISTFLG I Distribution flag
6 DISFUN I Distribution function (DEQATN)
7 DISTAB I Distribution table (TABLE3D)
8 FIELD(9) RS See GMBC record
Words 4 through 16 repeat 6 times
17 F1ID I Grid-n 1 identification number
279