NX Nastran DMAP Programmer's Guide - Kxcad.net

Name Type and Description
'DYNAMICS' Flutter and aeroelastic
'STADYN' All aerodynamic analysis types
ALPHAD Complex double precision. This is the scalar multiplier for [A].
ALPHAJ Real. Real part of shift point Aj for pre-Version 70.5 Lanczos method.
ALTSHAPE Integer. Set of displacement functions in p-element analysis.
0 MacNeal set
1 Full Product Space set.
AMLFLG Logical. Set to TRUE if AMLIST if generated. Output by AXMPR1.
APP Character. Analysis type.
Output by FRLG: Dynamic load type.
Set to 'FREQ', if RLOAD1 or RLOAD2 entries are referenced.
Set to 'TRAN', if TLOAD1 or TLOAD2 entries are referenced.
ARCLG Real. The arc length at the last converged step. Output by NLITER.
ARCSGN Integer. The sign of PDD P at the beginning of the subcase. This is
used in restarts in the post-buckling region. Output by NLITER.
AUNIT Logical. If TRUE then unit solutions are assumed.
AUNITS Real. Used to convert accelerations expressed in gravity units to units
of length per time squared.
AUTOADJ Character. Adjoint sensitivity automatic selection flag. If set to 'YES',
then adjoint sensitivity will be automatically selected if appropiate.
Usually input via user parameter.
AUTOSEEL Character. Default=NO. Input to SEP1.
‘NO’ Auto-SEELT capability ‘not’ activated.
‘YES’ Auto-SEELT capability activated.
AUTOSPC Character. Automatic constraint flag. If set to 'YES', then singularities
will be constrained.
AUXMFL Logical. Auxiliary model loop control flag. Output by AXMDRV. Set
to FALSE when processing the last auxiliary model.
AUXMID Integer. Auxiliary model identification number. Output by
AXMDRV.
BADMESH Logical. Bad geometry was detected.
685