NX Nastran DMAP Programmer's Guide - Kxcad.net

Chapter 3
Name
Chapter 2
Name
Description
V01P Partitioning vector for sparse load reduction.
VDXC Partitioning vector with 1.0 at rows corresponding to
null columns in KDD, BDD, and MDD.
VDXR Partitioning vector with 1.0 at rows corresponding to
null rows in KDD, BDD, and MDD.
VELEM Table of element lengths, areas, and volumes. Output by
ELTPRT.
VELEMDCN Table of element lengths, areas, and volumes which
incorporates combined constraints and design variables.
Output by DSAF.
VELEMN Table of element lengths, areas, and volumes for the
perturbed configuration. Output by ELTPRT.
VFO1 VFO zero-partition by SPCCOL. VFO is the local f-size
partitioning vector with 6 values of 1.0 for every grid in
the local residual. Required only for geometric domain
decomp.
VG Left-handed displacement matrix in g-set. Divergence
and flutter analysis only.
VGA G-set size partitioning vector with values of 1.0 at the
rows corresponding to the a-set.
VGF Fluid/structure partitioning vector with ones at the rows
corresponding to fluid degrees-of-freedom. Output by
GP1.
VGFD Partitioning vector with ones at rows corresponding to
degrees-of-freedom connected to frequency-dependent
elements. Output by TA1.
VGA G-set size partitioning vector with values of 1.0 at the
rows corresponding to the a-set.
VGQ Partitioning vector with values of 1.0 at rows
corresponding to degrees-of-freedom in the q-set.
VIEWTB VIEWTB View information table, contains the relationship
between each p-element and its view-elements and viewgrids.
Output by VIEWP.
669