NX Nastran DMAP Programmer's Guide - Kxcad.net

GUST Computes loads for aerodynamic analysis
GUST
Computes loads for aerodynamic analysis
Computes loads for aerodynamic analysis that are associated with aerodynamic flow.
Format:
GUST CASECC,DLT,FRL,DIT,QHJL,UNUSED6,UNUSED7,ACPT,
CSTMA,PHF/
PHF1,WJ,QHJK,PFP/
S,N,NOGUST/BOV/MACH/Q $
Input Data Blocks:
CASECC Table of Case Control command images.
DLT Table of dynamic loads.
FRL Frequency response list.
DIT Table of TABLEij Bulk Data entry images.
QHJL Aero transformation matrix between h and j sets.
UNUSED6 Unused and may be purged.
UNUSED7 Unused and may be purged.
ACPT Aerodynamic connection and property table.
CSTMA Table of aerodynamic coordinate system transformation matrices for gset
and ks-set grid points.
PHF Frequency response load matrix in the h-set (modal).
Output Data Blocks:
PHF1 Frequency response load matrix in the h-set (modal) combined with
gust loads.
WJ Gust matrix.
QHJK Aero transformation matrix between h and j sets.
PFP Frequency response load matrix in the p-set combined with gust loads.
Parameters:
NOGUST Output-integer-no default. Gust load flag. Set to -1 if no gust loads
exist; otherwise set to 1.
BOV Input-real-default=0.0. Conversion from frequency to reduced
frequency.
107