NX Nastran DMAP Programmer's Guide - Kxcad.net

Chapter 3
Name
Chapter 2
Name
Description
PHGREF Designed normal modes eigenvector matrix in the g-set
from the prior design cycle output of MODTRK. Output
by MODTRK.
PHGREF1 Designed normal modes eigenvector matrix in the g-set
updated for mode tracking. Output by MODTRK.
PHIDLL Retained left divergence eigenvector responses.
PHIDRL Retained right divergence eigenvector responses.
PHT Transient response load matrix in the h-set (modal) for
all time steps. Output by TRLG.
PHX Right eigenvector matrix for real eigenvalues only.
Output by UEIGL.
PHXL Left eigenvector matrix for real eigenvalues only. Output
by UEIGL.
PHZ Generalized degree-of-freedom transformation matrix.
Output by DYNREDU.
PJ Static load matrix for the g-set of the current
superelement and applied to its interior points only.
PKF Matrix of k-set forces per frequency.
PKYG Matrix of equivalent static loads due to enforced
displacement for the g-set.
PL Static load matrix reduced to the l-set. Output by SSG2.
PLI Static load matrix with inertial loads and reduced to the
l-set. Output by SSG4.
PLIST2 Table of type two properties on DVPREL2 Bulk Data
entries. Output by DOPR1.
PLIST2* Family of tables of type two properties on DVPREL2
Bulk Data entries. Output by DOPR1.
PLMAT Initial and final load matrices for subcase.
PLOTMSG Table of user informational messages generated during
the plot process. Output by PLOT.
651